Results (1378 found)
Product
WSSH 50PC Y
The frame can be used wherever a shadow gap is not desired for surface mounting. Depending on the colour, it has the advantage of increasing the visibility of the Intercom station. Furthermore, the call station is better protected against spontaneous vandalism by the frame. The frame can be used in combination with polycarbonate wallmount stations as well as with membrane protected stations. To simplify cable routing for plaster mounting, the frame is equipped with cut-outs that can be fitted with the WSSH 50P cable gland. The frame is held to the wall by the WSSH 50P, but can optionally be fixed to the surface with up to six screws. The front panel can be removed using the removal kit. Colour yellow corresponds to RAL 1018.
Product
PA1-S6
300 Watt pluggable Power Supply for S6 Servers, input: 100–240 VAC with IEC-60320-C14 connection (IEC cable KAB-C13 not included).
Product
XDX FB
With the gypsum wall/panel mount kit XDX FB, an Intercom station can be installed e.g. in a drywall.
Product
L8-WAN-8
The G8-LAN network cards are the solution to the challenge of IoIP – Intercom over IP: GE 300 and / or GE 800 Intercom Servers can be networked in IP-networks via Ethernet connections.
Product
EE 7P04D S H
Industrial Intercom Station with party-line keypad, 4 function buttons, loudspeaker and handset
Product
XDX SHID
With the surface mount kit XDX SHID made from polycarbonate, an Intercom station can be installed to any wall. The XDX SHID is especially designed for subsequent mounting to a wall or for mounting to thin walls. The surface mount kit XDX SHID can be mounted to a flush mount wall box (acc. EN 60670-1; 60 mm/2.36 in screw distance; single or double box)