Results (1377 found)
Product
EX 7504D 1 AC S H
By focusing on the highest safety levels, simple operation and future proof scalability, Commend’s Series EX 7000D is especially designed for communication in potentially explosive atmospheres. In order to verify their absolute reliability for use in Ex zones with hazardous gases or dusts, the Intercom stations are both ATEX-, CCC- and IECEx-certified. Based on a rugged, corrosion-resistant and lightweight “Ex e” polycarbonate housing, the Series EX 7000D enables simple and rapid installation, eliminates expensive routine servicing and drastically reduces maintenance costs. Additionally, the IP66 certification (acc. to EN/IEC 60079-0) and a wide permissible temperature range make the Intercom stations the perfect choice for a wide range of applications in explosive environments. Thanks to the dust- and water-insensitive microphones and the 16 kHz eHD Voice audio quality, the Series EX 7000D comes with highest speech intelligibility. Even in very noisy environments, two powerful amplifiers for the optional built-in loudspeaker and a connectable PA loudspeaker ensure a crystal clear sound. Furthermore, the microphone and the IVC feature (Intelligent Volume Control) allow to adjust the volume automatically to the ambient noise – even during playback.
Product
G8-LAN-8
The G8-LAN network cards are the solution to the challenge of IoIP – Intercom over IP: GE 300 and / or GE 800 Intercom Servers can be networked in IP-networks via Ethernet connections.
Product
L3-GED-4D
DSP subscriber card for connection of up to four 2-wire digital subscribers. Up to five G3-GED cards can be used with a GE 300 IP Intercom Server, as well as five additional ones in Expansion Central GEZ 300. One call per subscriber is possible at the same time (non-blocking). Connection via pluggable screw terminals.
Product
WSFB 50V FL
Mounting Kit for precise flush mounting of Series WS V Intercom Stations and expansion modules
Product
ET 908H-1
The hybrid modules ET 908H (RJ45 jacks mounted horizontally) and ET 908H-1 (RJ45 jacks mounted vertically) have been developed for installation in existing housings or for construction of special Intercom stations. As they support both IoIP connections and SIP solutions (hybrid), the hybrid modules can easily be integrated into any Voice over IP system as well as any existing Commend Intercom system. The desired operation mode is selected via the configuration software. Applications for the hybrid modules are all kinds of call and emergency call stations, where the stations are built-in and only the external call buttons are used. This means, special solutions for e.g. emergency call pillars, elevator cabins, ticketing machines or barriers at entrances and exits can be created, which optimally satisfy function and optical appearance of the customer specifications. Furthermore, the hybrid modules are perfectly suited for use as door stations at entrance areas and gateways due to two integrated relay outputs.
Product
SOS-Button
The SOS button consists of an impact-resistant mast housing containing two loudspeakers, a microphone, an intercom module and an LTE router including antenna. The highly visible emergency call station is independent of the surrounding infrastructure and can be positioned almost anywhere in the city or community, depending on its use as an emergency call or information station - a suitable power supply is sufficient. The station provides acoustic and visual feedback on the operating status and operating steps. When a button is pressed, a direct voice connection is established to the centre providing assistance; a callback is also possible from there in order to provide the person seeking help with further information. The call station also has various options to make misuse more difficult. The many possible applications range from emergency call stations for parks and public places to information stations on public transport, at entrances suitable for the disabled and at information points, and can even be set up at short notice for special occasions or events. The emergency call or info call stations monitor themselves and report errors (via SNMP) to any location. The intercom stations are delivered to the installation site ready configured and only need to be installed and connected to the power supply.
Product
SIP-WS 800V
The OpenDuplex capable and vandal resistant SIP wallmount station SIP-WS 800V has been developed and designed for areas with high requirements on safety. The station is connected directly with the Ethernet (LAN/WAN) and in this manner it is connected to a compatible SIP server via the IP network. The built-in switch with downlink function allows direct connection of an additional IP device (e.g. an IP camera). Besides high volume, the SIP station provides a numerous amount of further features: Pre-recorded audio can be applied in a multi-purpose manner, e.g. as acoustic indication at line fault or as waiting information at call initiation. A configurable background noise suppression provides a crystal clear communication in challenging situations. Furthermore, the station is perfectly suited for use as door stations at entrances and gateways, due to integrated relay outputs. The 3 mm stainless steel front panel with tamper protection and special screws protects against vandalism. The robust construction provides full protection against water, dirt and dust – IP rating IP66
Product
AF 125
The AF 125H provides a high output range and various connections – from a microphone input to a relay output. That’s why the amplifier is universally suitable for any size of application – even for complex public address and Intercom solutions. In order to avoid cabling costs and be more flexible, the AF 125H is specifically optimised for installation either in a 19” rack or on-site. Thanks to its high flexibility, the AF 125H is applicable in the most diverse areas where a reliable and powerful public address is needed. Thereby, this amplifier covers all requirements from public service facilities, critical infrastructure and smart city applications, office and school buildings up to the requirements of challenging and high-noise industrial environments.
Product
Series CLS 6 PW
The projector loudspeaker CLS 6 PW for wall and ceiling mounting is designed specifically to provide reliable voice signal transmission under rough indoor conditions (e.g. car parks, exhibition halls and event halls). The 130 mm chassis impresses with a high sound pressure level and an excellent frequency range. As it is based on classic 70/100 V technology, the loudspeaker can be easily combined with any Commend 70/100 V amplifier. The symmetrical design permits horizontal and vertical installation. Anti-theft protection is ensured by the housing used. Suitable for EVAC applications according to DIN 60849.