Results (1379 found)
Product
CM1
This high-end camera module is made from high-quality materials such as glass and anodised aluminium. Thanks to it timeless and inconspicuous design, it is suitable for modern custom solutions. The powerful camera module is connected to the Intercom module im6. An HS-Link cable from Commend with a length of up to 3 m (118 in) can be used for this purpose. The cm1 can be installed e.g. in Intercom stations specially designed to customer requirements, columns and automatic pay stations as well as smart city solutions. With WDR (“Wide Dynamic Range”), the camera provides a clear and high-quality video image even in difficult lighting conditions, for example, overexposed or too dark areas.
Product
WSSH 50V OR
Mounting Kit for surface mounting of Series WS V Intercom stations and extension modules; frame: RAL 2004
Product
WS 211V D
Digital station with one programmable, back-lit emergency call button, electret condenser microphone with multifunction LED, loudspeakers 2 x 8 Ω, 3 inputs for floating contacts and 2 relay outputs (connection as normally open or normally closed contact), protection classification IP66 and IK09, material stainless steel.
Product
L8-IF-ICX
Using the IP interface card G8-IF external systems (e.g. access control, video and radio system) can be connected to the Intercom Servers GE 800 via an IP network or RS-232 according to the Commend standard protocol.
Product
EX 7504D 1 AC S H
By focusing on the highest safety levels, simple operation and future proof scalability, Commend’s Series EX 7000D is especially designed for communication in potentially explosive atmospheres. In order to verify their absolute reliability for use in Ex zones with hazardous gases or dusts, the Intercom stations are both ATEX-, CCC- and IECEx-certified. Based on a rugged, corrosion-resistant and lightweight “Ex e” polycarbonate housing, the Series EX 7000D enables simple and rapid installation, eliminates expensive routine servicing and drastically reduces maintenance costs. Additionally, the IP66 certification (acc. to EN/IEC 60079-0) and a wide permissible temperature range make the Intercom stations the perfect choice for a wide range of applications in explosive environments. Thanks to the dust- and water-insensitive microphones and the 16 kHz eHD Voice audio quality, the Series EX 7000D comes with highest speech intelligibility. Even in very noisy environments, two powerful amplifiers for the optional built-in loudspeaker and a connectable PA loudspeaker ensure a crystal clear sound. Furthermore, the microphone and the IVC feature (Intelligent Volume Control) allow to adjust the volume automatically to the ambient noise – even during playback.
Product
WSLM 56P
Active loudspeaker module with 6 loudspeakers for use in very high-noise environments. Polycarbonate construction. The modules can be mounted above, below or next to WS-stations or can be positioned freely in the room. If the modules are mounted at a greater height, they can optimally address large rooms or outside areas.
Product
EB3E2A-AUD
The expansion module EB3E2A-AUD provides an easy way to expand the inputs and outputs as well as the audio capabilities of an Intercom station. The expansion module is suitable for any applications where inputs and outputs and additional audio interfaces are required. It supports three inputs and has two relay outputs and is equipped with ports for direct connection of an external loudspeaker, a microphone, a headset and a handset. Line-in and line-out jacks provide additional flexibility. The EB3E2A-AUD provides a secure, cost-efficient way of integrating inputs and outputs directly into the Intercom station. The resulting solution is suitable for implementing additional inputs and outputs for the control of external components. Installation is fast and easy: the expansion module connects to an Intercom station via a USB cable and is immediately ready for use.
Product
L3-GED-4D
DSP subscriber card for connection of up to four 2-wire digital subscribers. Up to five G3-GED cards can be used with a GE 300 IP Intercom Server, as well as five additional ones in Expansion Central GEZ 300. One call per subscriber is possible at the same time (non-blocking). Connection via pluggable screw terminals.
Product
WSFB 50V FL
Mounting Kit for precise flush mounting of Series WS V Intercom Stations and expansion modules
Product
IM1
The im1 is a cost-effective intercom module based on the powerful Symphony MX platform and marks the next step in the development of smart communication solutions. Designed for OEM systems and customised communication solutions, it offers a smart combination of modern technology and economic efficiency. The im1 focuses on the essentials: powerful voice communication, simple integration and a convincing price-performance ratio. Despite its slim design, it ensures reliable communication – even in noisy or challenging environments when installed in vending machines, barriers or emergency call stations. Thanks to efficient hardware and sophisticated interfaces, the im1 can be integrated in a variety of ways and offers a future-proof, economical solution for modern communication systems. Intercom stations can be connected to Symphony Cloud and use its services. Symphony is the world’s first cloud-based Intercom platform with “Privacy and Security by Design”. Visit our website to find out about the services currently available and if they are already offered in your country.