Results (1376 found)
Product
L3-IP-4P
IP DSP subscriber card for connection of up to 8 IP subscribers via Ethernet (LAN/WAN). Up to five G3-IP cards can be used with a GE 300 IP Intercom Server, as well as five additional ones in Expansion Central GEZ 300. Connection via the Ethernet port of the IP Intercom Server.
Product
G8-TEL
The G8-TEL multipurpose interface card builds a bridge between Intercom networks and telephone networks. Every interface card may be configured for one of the two possible modes: PABX mode: The Intercom stations can call any desired telephone number. Conversely, the Intercom stations can also be called from any telephone. In addition all Intercom functions can be activated via the DTMF keypad of the remote telephone, e.g. All Calls, Group Calls, Door Calls with after-dialling for door opening, etc. Auto dialler mode (alarm dialler): Calls and Call Requests from the Intercom Server initiate predefined dialling sequences. The called telephone receives a voice message identifying the calling station by means of integrated, user-configurable speech storage. The telephone can talk to the caller and, if required, activate remote access functions, e.g. open a door.
Product
WSDU 52P TW
Dummy module with transparent viewing panel, half height format. Polycarbonate construction.
Product
ET 8E8A
This module enables the management of remote inputs and outputs in complex systems far from the central. Data is transmitted fully digital via 2-wire lines to the central. Managing of 8 inputs with 5 steps and 8 outputs, thereof 4 make- and 4 change-over contacts. Status-LEDs for all inputs and outputs show the function at a glance, additionally the line from the ET 8E8A to the central is continuously monitored. Mounting is possible in a 19“ rack on a DIN rail or with the supplied mounting rail for wall mounting.
Product
L8-IP-32-32B
The plug-in Server G8-IP-32 from Commend introduces a new era of Intercom Expansion cards. Connection of up to 64 Intercom stations and extensive, distributed intelligence turn the card into a fully fledged Intercom Server. Unsurpassed capacity and performance reserves, critical for all areas, in which many Intercom stations must be managed centrally in one location in a intelligent manner. This results in a maximum expansion of 896 Intercom Terminals per GE 800 housing (14 plug-in Servers G8-IP-32).
Product
DINRAIL150
Top-Hat DIN Rail kit for mounting of modules designed for top hat rail mounting; length: 150 mm
Product
WSSH 50PC Y
The frame can be used wherever a shadow gap is not desired for surface mounting. Depending on the colour, it has the advantage of increasing the visibility of the Intercom station. Furthermore, the call station is better protected against spontaneous vandalism by the frame. The frame can be used in combination with polycarbonate wallmount stations as well as with membrane protected stations. To simplify cable routing for plaster mounting, the frame is equipped with cut-outs that can be fitted with the WSSH 50P cable gland. The frame is held to the wall by the WSSH 50P, but can optionally be fixed to the surface with up to six screws. The front panel can be removed using the removal kit. Colour yellow corresponds to RAL 1018.