Results (1374 found)
Product
WSFB 52V SS MC
Mounting Kit for precise flush mounting of Series WS V Intercom Stations and expansion modules for metal cabinets/pillars/facades; levelling frame: stainless steel, half-height
Product
SOS-Button
The SOS button consists of an impact-resistant mast housing containing two loudspeakers, a microphone, an intercom module and an LTE router including antenna. The highly visible emergency call station is independent of the surrounding infrastructure and can be positioned almost anywhere in the city or community, depending on its use as an emergency call or information station - a suitable power supply is sufficient. The station provides acoustic and visual feedback on the operating status and operating steps. When a button is pressed, a direct voice connection is established to the centre providing assistance; a callback is also possible from there in order to provide the person seeking help with further information. The call station also has various options to make misuse more difficult. The many possible applications range from emergency call stations for parks and public places to information stations on public transport, at entrances suitable for the disabled and at information points, and can even be set up at short notice for special occasions or events. The emergency call or info call stations monitor themselves and report errors (via SNMP) to any location. The intercom stations are delivered to the installation site ready configured and only need to be installed and connected to the power supply.
Product
ET 908H-1
The hybrid modules ET 908H (RJ45 jacks mounted horizontally) and ET 908H-1 (RJ45 jacks mounted vertically) have been developed for installation in existing housings or for construction of special Intercom stations. As they support both IoIP connections and SIP solutions (hybrid), the hybrid modules can easily be integrated into any Voice over IP system as well as any existing Commend Intercom system. The desired operation mode is selected via the configuration software. Applications for the hybrid modules are all kinds of call and emergency call stations, where the stations are built-in and only the external call buttons are used. This means, special solutions for e.g. emergency call pillars, elevator cabins, ticketing machines or barriers at entrances and exits can be created, which optimally satisfy function and optical appearance of the customer specifications. Furthermore, the hybrid modules are perfectly suited for use as door stations at entrance areas and gateways due to two integrated relay outputs.
Product
WS 211V D
Digital station with one programmable, back-lit emergency call button, electret condenser microphone with multifunction LED, loudspeakers 2 x 8 Ω, 3 inputs for floating contacts and 2 relay outputs (connection as normally open or normally closed contact), protection classification IP66 and IK09, material stainless steel.
Product
L8-IF-ICX
Using the IP interface card G8-IF external systems (e.g. access control, video and radio system) can be connected to the Intercom Servers GE 800 via an IP network or RS-232 according to the Commend standard protocol.
Product
WSSH 50V OR
Mounting Kit for surface mounting of Series WS V Intercom stations and extension modules; frame: RAL 2004
Product
Series CLS 6 PW
The projector loudspeaker CLS 6 PW for wall and ceiling mounting is designed specifically to provide reliable voice signal transmission under rough indoor conditions (e.g. car parks, exhibition halls and event halls). The 130 mm chassis impresses with a high sound pressure level and an excellent frequency range. As it is based on classic 70/100 V technology, the loudspeaker can be easily combined with any Commend 70/100 V amplifier. The symmetrical design permits horizontal and vertical installation. Anti-theft protection is ensured by the housing used. Suitable for EVAC applications according to DIN 60849.
Product
MIC 480S-08
Creating a small-scale microphone without compromising functionality can be quite a challenge, especially if the device is intended for outdoor environments, where it is subject to various climatic conditions. Commend has come up with an uncompromisingly effective solution to the problem: MIC 480 is specifically designed to transmit voice sound at the usual high quality while guarding against various forms of weather-specific interference. Probably one of the most unfavourable causes of interference is exposure to rain. That’s why the MIC 480 has a distinct shape that prevents rainwater from getting inside. It does so by effectively using the mechanics of surface tension in order to redirect the fluid. Also, the specially designed cavity provides a speech-optimised frequency response that enhances the audibility of the human voice range. MIC 480 is typically installed on intercom terminals in parking columns, ticket machines or elevator panels, or it is used as a customerside microphone for counter intercoms. This versatility makes the microphone suitable for almost any existing intercom solution and ready for future systems. The large number of units sold over more than two decades is proof of the design quality and reliability of this precision-crafted device.
Product
GEI 300
GEZ 300 – Expansion housing including Power supply with five plug-in slots for subscriber cards and / or interface cards. Connection to the IP Intercom Server via ribbon cable. GEI 300 – Interface housing with two slots for G8-interface cards (application in GEI 300 interface housing is shown on the respective cards – see datasheet). Connection to the IP Intercom Server GE 300 or the expansion housing GEZ 300 via ribbon cable.