Results (1376 found)
Product
WSLM 56P
Active loudspeaker module with 6 loudspeakers for use in very high-noise environments. Polycarbonate construction. The modules can be mounted above, below or next to WS-stations or can be positioned freely in the room. If the modules are mounted at a greater height, they can optimally address large rooms or outside areas.
Product
EB3E2A-AUD
The expansion module EB3E2A-AUD provides an easy way to expand the inputs and outputs as well as the audio capabilities of an Intercom station. The expansion module is suitable for any applications where inputs and outputs and additional audio interfaces are required. It supports three inputs and has two relay outputs and is equipped with ports for direct connection of an external loudspeaker, a microphone, a headset and a handset. Line-in and line-out jacks provide additional flexibility. The EB3E2A-AUD provides a secure, cost-efficient way of integrating inputs and outputs directly into the Intercom station. The resulting solution is suitable for implementing additional inputs and outputs for the control of external components. Installation is fast and easy: the expansion module connects to an Intercom station via a USB cable and is immediately ready for use.
Product
EB 330AH
EB 330AH external cell electronics module for remote electronics installation (e.g. riser shaft) with terminal connection to an EF 031x front panel. The module is mounted on a fitting panel suitable for top-hat rail mounting. The other technical characteristics are the same as those of EB 330A.
Product
WSSH 50V OR
Mounting Kit for surface mounting of Series WS V Intercom stations and extension modules; frame: RAL 2004
Product
WS 211V D
Digital station with one programmable, back-lit emergency call button, electret condenser microphone with multifunction LED, loudspeakers 2 x 8 Ω, 3 inputs for floating contacts and 2 relay outputs (connection as normally open or normally closed contact), protection classification IP66 and IK09, material stainless steel.
Product
L8-IF-ICX
Using the IP interface card G8-IF external systems (e.g. access control, video and radio system) can be connected to the Intercom Servers GE 800 via an IP network or RS-232 according to the Commend standard protocol.
Product
G3 Input/Output Cards
The input/output cards are part of the unique interface concept of the Intercom Server GE 300. They enable various control and indication functions and thus upgrade the Intercom Server to a universal control unit for all kinds of actors and sensors. The different designs of these cards allow flexible configuration, adapted to the customer‘s needs. The inputs read in floating contacts, the outputs are relay contacts, designed as make contact, open contact or changeover contact.
Product
OD10 SH
With the surface mount kit OD10 SH, a base module can be installed to any wall. The OD10 SH is especially designed for subsequent mounting to a wall or for mounting to thin walls. The surface mount kit OD10 SH can be mounted to a 2-fold flush-mounted wall box (acc. EN 60670-1; 60 mm/2.36 in screw distance). In combination with this surface mount kit, tamper detection is possible with an OD10 TD CM
Page
RMA Form
RMA To initiate a return, exchange, or warranty repair, please complete the form below. Please note: For returns authorisations from Germany, Switzerland and Americas, please use the relevant forms available here .