Results (1373 found)
Product
OD10 SH
With the surface mount kit OD10 SH, a base module can be installed to any wall. The OD10 SH is especially designed for subsequent mounting to a wall or for mounting to thin walls. The surface mount kit OD10 SH can be mounted to a 2-fold flush-mounted wall box (acc. EN 60670-1; 60 mm/2.36 in screw distance). In combination with this surface mount kit, tamper detection is possible with an OD10 TD CM
Page
RMA Form
RMA To initiate a return, exchange, or warranty repair, please complete the form below. Please note: For returns authorisations from Germany, Switzerland and Americas, please use the relevant forms available here .
Product
Series CLS 6 PW
The projector loudspeaker CLS 6 PW for wall and ceiling mounting is designed specifically to provide reliable voice signal transmission under rough indoor conditions (e.g. car parks, exhibition halls and event halls). The 130 mm chassis impresses with a high sound pressure level and an excellent frequency range. As it is based on classic 70/100 V technology, the loudspeaker can be easily combined with any Commend 70/100 V amplifier. The symmetrical design permits horizontal and vertical installation. Anti-theft protection is ensured by the housing used. Suitable for EVAC applications according to DIN 60849.
Product
MIC 480S-08
Creating a small-scale microphone without compromising functionality can be quite a challenge, especially if the device is intended for outdoor environments, where it is subject to various climatic conditions. Commend has come up with an uncompromisingly effective solution to the problem: MIC 480 is specifically designed to transmit voice sound at the usual high quality while guarding against various forms of weather-specific interference. Probably one of the most unfavourable causes of interference is exposure to rain. That’s why the MIC 480 has a distinct shape that prevents rainwater from getting inside. It does so by effectively using the mechanics of surface tension in order to redirect the fluid. Also, the specially designed cavity provides a speech-optimised frequency response that enhances the audibility of the human voice range. MIC 480 is typically installed on intercom terminals in parking columns, ticket machines or elevator panels, or it is used as a customerside microphone for counter intercoms. This versatility makes the microphone suitable for almost any existing intercom solution and ready for future systems. The large number of units sold over more than two decades is proof of the design quality and reliability of this precision-crafted device.
Product
GEI 300
GEZ 300 – Expansion housing including Power supply with five plug-in slots for subscriber cards and / or interface cards. Connection to the IP Intercom Server via ribbon cable. GEI 300 – Interface housing with two slots for G8-interface cards (application in GEI 300 interface housing is shown on the respective cards – see datasheet). Connection to the IP Intercom Server GE 300 or the expansion housing GEZ 300 via ribbon cable.
Product
G8-GED Subscriber Card
All station specific functions are handled by the subscriber cards. The subscriber cards are available in different feature levels: B, C, D and P. The cards of the higher levels contain all the features of the lower ones plus additional features. An overview of the features is available separately
Product
CLS 6 RCW
The loudspeaker CLS 6 RCW for surface mounting features a modern aluminium housing and is suitable for speech and music signal transmission.
Product
WS 201 SOS V I
The vandal-resistant emergency call stations with one or three direct dialling buttons are designed for areas with high security requirements. The technology enables excellent speech quality and intelligibility regardless of ambient noise. The 3 mm thick front panel with poke protection and special screws protects against vandalism. The compact design is protected against the ingress of water, dirt or dust – protection class IP54. Each button can be assigned a call number and the respective labelling field can be printed individually. The large emergency call button is clearly visible even from a great distance and can be pressed quickly in emergency situations. The emergency call station is protected against misuse by a shatterproof glass pane that can be broken in an emergency.
Product
WSFB 50V SS MC
Mounting Kit for precise flush mounting of Series WS V Intercom Stations and expansion modules for metal cabinets/pillars/facades; levelling frame: stainless steel
Product
SOS-Button
The SOS button consists of an impact-resistant mast housing containing two loudspeakers, a microphone, an intercom module and an LTE router including antenna. The highly visible emergency call station is independent of the surrounding infrastructure and can be positioned almost anywhere in the city or community, depending on its use as an emergency call or information station - a suitable power supply is sufficient. The station provides acoustic and visual feedback on the operating status and operating steps. When a button is pressed, a direct voice connection is established to the centre providing assistance; a callback is also possible from there in order to provide the person seeking help with further information. The call station also has various options to make misuse more difficult. The many possible applications range from emergency call stations for parks and public places to information stations on public transport, at entrances suitable for the disabled and at information points, and can even be set up at short notice for special occasions or events. The emergency call or info call stations monitor themselves and report errors (via SNMP) to any location. The intercom stations are delivered to the installation site ready configured and only need to be installed and connected to the power supply.