Results (1371 found)
Product
OD10 FBS
With the flush mount box OD10 FBS, a base module can be installed e.g. to a brick wall. The OD10 FBS is designed for wall mounting during the construction or renovation phase. To mount the Intercom station, the drywall/panel kit OD10 FB is required. With this flush mount box, a plaster compensation is possible.
Product
G8-IP-4B
With an IP subscriber card G8-IP up to eight Intercom stations can be connected to an Intercom Server GE 800 via an IP network.
Product
L8-IP-4P
With an IP subscriber card G8-IP up to eight Intercom stations can be connected to an Intercom Server GE 800 via an IP network.
Product
EE 7008D AC H
Industrial Intercom Station with 8 function buttons, handset and AC power supply
Product
WSLM 52V
Vandal resistant active loudspeaker module with 2 loudspeakers for use in very high-noise environments. The modules can be mounted above, below or next to WS-stations or can be positioned freely in the room. If the modules are mounted at a greater height, they can optimally address large rooms or outside areas. The vandal resistant module is protected with a 3 mm stainless steel front panel, special screws and rugged construction.
Product
IM1-EXT
Board-level IP Intercom module without housing, with smart 10 W amplifier, RJ45 and USB port, and flexible microphone and loudspeaker connectivity via I/O interface
Product
ID8 TD CM-B
The id8 is a control desk of the Symphony MX product family. This allows shorter call answering times than ever before. This way, the id8 makes workflows and processes more efficient while taking pressure off control room staff, thanks to the convenient direct dialling buttons. Regardless of the application scenario, the control desk provides full control of the entire security system to ensure that no emergency call goes undetected or unanswered. Whether using a gooseneck microphone or a handset, users can rely on their message getting across in crystal clear voice quality. That’s Intercom at the highest level. Of course, the id8 is also fully compatible with previous-generation Commend systems.
Product
SIP-WS 200P
The OpenDuplex capable SIP stations of the series SIP-WS 200P have been developed and designed for areas with high requirements on safety. The stations are connected directly with the Ethernet (LAN/WAN) and in this manner they are connected to a compatible SIP server via the IP network. The built-in switch with downlink function allows direct connection of an additional IP device (e.g. an IP camera). Besides high volume, the SIP stations provide a numerous amount of further features: Pre-recorded audio can be applied in a multi-purpose manner, e.g. as acoustic indication at line fault or as waiting informa- tion at call initiation, a configurable background noise suppression pro- vides a crystal clear communication in challenging situations Furthermore, the stations are perfectly suited for use as door stations at entrances and gateways, due to integrated relay outputs.
Product
ET 8E8A-IP
The IP-based I/O module provides the entire Commend line of Intercom Servers with useful control connections to external components to ensu- re added value for operators. As a result, intelligent door/gate control is as easy to implement as auto- matic trigger mechanisms for emergency flash lights or sirens, live status displays, and a wide range of other applications that would otherwise require the purchase of external control systems. Self-monitoring of all control connections is an additional benefit that en- sures low-maintenance operation. All in all, the IP-based I/O module offers an easy, cost-efficient way to add input/output control to existing systems.