Results (959 found)
Product
ET 970HR
IP Intercom Module, compliant with EN-50155 (for installation in rolling stock), with polycarbonate housing, microphone MIC 480 and connection ports for an external loudspeaker and up to three call buttons. The EN 50155 certified IP Intercom module is perfectly suited for rolling stock and railway applications. Furthermore, these modules can be used as door stations at entrance areas and gateways, due to two integrated relay outputs The hybrid IP Intercom module ET 970HR has been developed for installation in existing housings or for construction of special Intercom terminals. As they support both IoIP connections and SIP solutions (hybrid), the Intercom modules can easily be integrated into any Voice over IP system as well as any existing Commend Intercom system. The desired operation mode is selected via the configuration software.
Product
WS 52 RFID P
RFID trigger unit for retrofitting NGRS wall-mounted intercom stations. PoE and a free switch port are required for operation. Technology: MIFARE DESFire EV2.
Product
USM 933H-11
Tamper/Weather resistant security substation connects to Commend servers via Cat 5 cable. It is used for either stanchion or security wall housing mounts, when both attractive appearance and extreme durability are important. Please contact Commend for custom buttons/text.
Product
GE 800UL
IP Intercom Server in 19” Technology for up to 25,000 subscribers in a local network. Allows connection of 112 IP or 56 digital subscribers. Housed in an elegant industrial design with 3 rack units for mounting in 19” racks. Integrated functions for door and gate control, alarm, video integration, control desk, etc. The manifold networking concepts allow security and communication systems with up to 14,280 networked Intercom Servers. It is also possible to forward calls to the public telephone network. One AF-input (for music or alarm), two inputs for floating contacts, two relay outputs, RS232 and IP-interface for (remote) programming or maintenance.
Product
CLS 10 HG
The CLS 10 HG is suitable for speech and music signal transmission and can be used both for indoor and outdoor applications. Self-extinguishing ABS housing material in combination with a multi-stage swivel bracket made of V4A stainless steel (1.4571) resistance category III ensures durability and safety. The M20 cable gland provides protection against heavy water penetration. An additional hole in the pressure chamber allows the water to drain off after cleaning. This horn comes also equipped with a high-pass filter.
Product
GE 300CA
The Intercom Server GE 300 is ideal for Intercom systems where small, manageable units are combined to form a network. Each GE 300 acts as an IP Intercom Server that controls the various interfaces: interface cards for speech, control and indication functions, as well as interfaces for communication with other systems such as video systems, door and gate control, telephone systems and more. The connection of the special GEI 300 interface housing also allows the use and operation of cards from the GE 800 Intercom system.
Product
EX 7504D S
By focusing on the highest safety levels, simple operation and future proof scalability, Commend’s Series EX 7000D is especially designed for communication in potentially explosive atmospheres. In order to verify their absolute reliability for use in Ex zones with hazardous gases or dusts, the Intercom stations are both ATEX-, CCC- and IECEx-certified. Based on a rugged, corrosion-resistant and lightweight “Ex e” polycarbonate housing, the Series EX 7000D enables simple and rapid installation, eliminates expensive routine servicing and drastically reduces maintenance costs. Additionally, the IP66 certification (acc. to EN/IEC 60079-0) and a wide permissible temperature range make the Intercom stations the perfect choice for a wide range of applications in explosive environments. Thanks to the dust- and water-insensitive microphones and the 16 kHz eHD Voice audio quality, the Series EX 7000D comes with highest speech intelligibility. Even in very noisy environments, two powerful amplifiers for the optional built-in loudspeaker and a connectable PA loudspeaker ensure a crystal clear sound. Furthermore, the microphone and the IVC feature (Intelligent Volume Control) allow to adjust the volume automatically to the ambient noise – even during playback.
Product
EX 7008D 2 AC S H
By focusing on the highest safety levels, simple operation and future proof scalability, Commend’s Series EX 7000D is especially designed for communication in potentially explosive atmospheres. In order to verify their absolute reliability for use in Ex zones with hazardous gases or dusts, the Intercom stations are both ATEX-, CCC- and IECEx-certified. Based on a rugged, corrosion-resistant and lightweight “Ex e” polycarbonate housing, the Series EX 7000D enables simple and rapid installation, eliminates expensive routine servicing and drastically reduces maintenance costs. Additionally, the IP66 certification (acc. to EN/IEC 60079-0) and a wide permissible temperature range make the Intercom stations the perfect choice for a wide range of applications in explosive environments. Thanks to the dust- and water-insensitive microphones and the 16 kHz eHD Voice audio quality, the Series EX 7000D comes with highest speech intelligibility. Even in very noisy environments, two powerful amplifiers for the optional built-in loudspeaker and a connectable PA loudspeaker ensure a crystal clear sound. Furthermore, the microphone and the IVC feature (Intelligent Volume Control) allow to adjust the volume automatically to the ambient noise – even during playback.
Product
KAB-HS1-RJ
Adaptor Cable QD to RJ10 for headset HS 1, for connection to devices with headset port; cable length: 0.5 m to 2 m (coiled cable)
Product
EF 031-2R
An optimal communication via cell terminal keeps things safe for both custodians and inmates. The Intercom station’s DSP technology is pro- tected by an extremely rugged housing featuring a 3 mm stainless steel front panel. The powerful functionality allows direct communication without opening doors in correctional facilities, forensic clinics as well as police and court holding wards and prison cells. Cell terminal with piezo buttons for calls/emergency calls and light. The piezo buttons are equipped with an integrated LED. Front panel made of 3 mm (0.12 in) stainless steel, with poke protection and special screws for protection against vandalism. Antenna windows for optional cell phone detection module. The Intercom station is suited for flush mounting with the flush mount box UP 030 (with integrated sabotage contacts). Protected against intrusion of spray water, poking objects etc. The flush mount box (UP 030) as well as the terminal electronics (EB330x) must be ordered separately due to previous installation.