Results (1372 found)
Product
L3-IF-ICX
Using the IP interface card G3-IF external systems (e.g. access control, video and radio system) can be connected to the Intercom Servers GE 300 via an IP network or RS-232 according to the Commend standard protocol.
Product
G8A-I
Installation Board with 37-pin D-SUMBIN port for Plug-in Cards G8-GED, G8-GET, G8-TEL, G8-16A, G8-16E, G8-8E8A and G8-AUD
Product
EB 330AHS
EB 330AHS external cell electronics module with surface sensing functionality for remote electronics installation (e.g. riser shaft) with terminal connection to an EF 031x front panel. The module is mounted on a fitting panel suitable for top-hat rail mounting. The other technical characteristics are the same as those of EB 330A.
Product
CLS 6 PW70V
The projector loudspeaker CLS 6 PW for wall and ceiling mounting is designed specifically to provide reliable voice signal transmission under rough indoor conditions (e.g. car parks, exhibition halls and event halls). The 130 mm chassis impresses with a high sound pressure level and an excellent frequency range. As it is based on classic 70/100 V technology, the loudspeaker can be easily combined with any Commend 70/100 V amplifier. The symmetrical design permits horizontal and vertical installation. Anti-theft protection is ensured by the housing used. Suitable for EVAC applications according to DIN 60849.
Product
GE 800 IP Intercom Server
IP Intercom Server in 19” Technology for up to 25,000 subscribers in a local network. Allows connection of 112 IP or 56 digital subscribers. Housed in an elegant industrial design with 3 rack units for mounting in 19” racks. Integrated functions for door and gate control, alarm, video integration, control desk, etc. The manifold networking concepts allow security and communication systems with up to 14,280 networked Intercom Servers. It is also possible to forward calls to the public telephone network. One AF-input (for music or alarm), two inputs for floating contacts, two relay outputs, RS232 and IP-interface for (remote) programming or maintenance.
Product
OD10 FBS
With the flush mount box OD10 FBS, a base module can be installed e.g. to a brick wall. The OD10 FBS is designed for wall mounting during the construction or renovation phase. To mount the Intercom station, the drywall/panel kit OD10 FB is required. With this flush mount box, a plaster compensation is possible.
Product
G3-TEL
The G3-TEL multipurpose interface card builds a bridge between Intercom networks and telephone networks. Every interface card may be configured for one of the two possible modes: PABX mode: The Intercom stations can call any desired telephone number. Conversely, the Intercom stations can also be called from any telephone. In addition all Intercom functions can be activated via the DTMF keypad of the remote telephone, e.g. All Calls, Group Calls, Door Calls with after-dialling for door opening, etc. Auto dialler mode (alarm dialler): Calls and Call Requests from the Intercom Server initiate predefined dialling sequences. The called telephone receives a voice message identifying the calling station by means of integrated, user-configurable speech storage. The telephone can talk to the caller and, if required, activate remote access functions, e.g. open a door.
Product
LED3
3-colour LED for status indication (active call, etc.) and optimised for modules im3 and im6. The LED3 can be mounted directly into a loudspeaker module LSM.
Product
EF 62W
Surface-mounting frame for Series EF 562, EF 862 and EF 962 Intercom Stations; RAL 9016 (White).
Product
XDX SHR
With the surface mount kit XDX SHR made of powder coated sheet steel, an intercom station id5, od5 or od1 can be mounted together with an Universal Reader XDX UNIR on a wall. The XDX SHR is primarily intended for subsequent mounting on a wall or for mounting on thin walls.