Results (1371 found)
Product
PA1-S3
65 Watt Deskop Power Adapter, input: 100–240 VAC, output: 19 VDC with barrel connector; cable length: 1.8 m (IEC cable KAB-C7 not included).
Product
L3-IP-4P
IP DSP subscriber card for connection of up to 8 IP subscribers via Ethernet (LAN/WAN). Up to five G3-IP cards can be used with a GE 300 IP Intercom Server, as well as five additional ones in Expansion Central GEZ 300. Connection via the Ethernet port of the IP Intercom Server.
Product
G8-TEL
The G8-TEL multipurpose interface card builds a bridge between Intercom networks and telephone networks. Every interface card may be configured for one of the two possible modes: PABX mode: The Intercom stations can call any desired telephone number. Conversely, the Intercom stations can also be called from any telephone. In addition all Intercom functions can be activated via the DTMF keypad of the remote telephone, e.g. All Calls, Group Calls, Door Calls with after-dialling for door opening, etc. Auto dialler mode (alarm dialler): Calls and Call Requests from the Intercom Server initiate predefined dialling sequences. The called telephone receives a voice message identifying the calling station by means of integrated, user-configurable speech storage. The telephone can talk to the caller and, if required, activate remote access functions, e.g. open a door.
Product
WSDU 52P TW
Dummy module with transparent viewing panel, half height format. Polycarbonate construction.
Product
ET 8E8A
This module enables the management of remote inputs and outputs in complex systems far from the central. Data is transmitted fully digital via 2-wire lines to the central. Managing of 8 inputs with 5 steps and 8 outputs, thereof 4 make- and 4 change-over contacts. Status-LEDs for all inputs and outputs show the function at a glance, additionally the line from the ET 8E8A to the central is continuously monitored. Mounting is possible in a 19“ rack on a DIN rail or with the supplied mounting rail for wall mounting.
Product
EE 7504D AC S
Industrial Intercom Station with full keypad, 4 function buttons, loudspeaker and AC power supply
Product
S3
The Intercom Server S3 brings all VirtuoSIS features into common server rooms. The cost-efficient and compact total package of hardware and software can be extended flexibly. Therefore, no extra hardware is needed – it is only necessary to activate the desired licences. A strong software provides all VirtuoSIS benefits. This means that the S3 combines reliability, crystal-clear intelligibility, easy maintenance as well as low costs. And, of course, the S3 is fully compatible to earlier Commend systems – such as Intercom servers or stations.
Product
EF 62NIRO
Surface-mounting frame with rain protection roof for Series EF 862 and EF 962 Intercom Stations; frame: stainless steel.
Product
G3-AUD Interface Card
The digital Audio Recording Card G3-AUD for the Intercom Servers GE 300 provides four or two audio channels as Plug-&-Play interface to PA systems and Radio systems with up to 16 kHz audio bandwidth. All audio in- and outputs have level adjustment, a Graphic Equalizer for adjustment of the tone characteristics and are galvanically isolated. The G3-AUD card contains relay contacts, which can be used for any desired function.