Results (1370 found)
Product
EB 330AH
EB 330AH external cell electronics module for remote electronics installation (e.g. riser shaft) with terminal connection to an EF 031x front panel. The module is mounted on a fitting panel suitable for top-hat rail mounting. The other technical characteristics are the same as those of EB 330A.
Product
L3-AUD-4D
The digital Audio Recording Card G3-AUD for the Intercom Servers GE 300 provides four or two audio channels as Plug-&-Play interface to PA systems and Radio systems with up to 16 kHz audio bandwidth. All audio in- and outputs have level adjustment, a Graphic Equalizer for adjustment of the tone characteristics and are galvanically isolated. The G3-AUD card contains relay contacts, which can be used for any desired function.
Product
ID5 TD CM
Maximum flexible and compatible – that’s exactly what the Commend Indoor series provides. For the stylish Intercom stations, only high-quality materials such as glass, stainless steel and aluminium are used. Thanks to its flat housing and the timeless look, the Indoor series Intercom stations are perfectly designed for indoor use – whether on desks or walls. Each Indoor series Intercom station comes with a large 5” touch display. Crystal clear audio enables high speech intelligibility. Via the well-arranged, intuitive web interface, the Indoor series Intercom stations can quickly and easily be configured. Not only that: the flexible web interface allows to manage handset, gooseneck microphone, I/O module and induction loop. These add-ons are connected via the two USB slots on the rear. Silver edition
Product
CM1
This high-end camera module is made from high-quality materials such as glass and anodised aluminium. Thanks to it timeless and inconspicuous design, it is suitable for modern custom solutions. The powerful camera module is connected to the Intercom module im6. An HS-Link cable from Commend with a length of up to 3 m (118 in) can be used for this purpose. The cm1 can be installed e.g. in Intercom stations specially designed to customer requirements, columns and automatic pay stations as well as smart city solutions. With WDR (“Wide Dynamic Range”), the camera provides a clear and high-quality video image even in difficult lighting conditions, for example, overexposed or too dark areas.
Product
WSSH 50V OR
Mounting Kit for surface mounting of Series WS V Intercom stations and extension modules; frame: RAL 2004
Product
WS 211V D
Digital station with one programmable, back-lit emergency call button, electret condenser microphone with multifunction LED, loudspeakers 2 x 8 Ω, 3 inputs for floating contacts and 2 relay outputs (connection as normally open or normally closed contact), protection classification IP66 and IK09, material stainless steel.
Product
WSLM 56P
Active loudspeaker module with 6 loudspeakers for use in very high-noise environments. Polycarbonate construction. The modules can be mounted above, below or next to WS-stations or can be positioned freely in the room. If the modules are mounted at a greater height, they can optimally address large rooms or outside areas.
Product
EB3E2A-AUD
The expansion module EB3E2A-AUD provides an easy way to expand the inputs and outputs as well as the audio capabilities of an Intercom station. The expansion module is suitable for any applications where inputs and outputs and additional audio interfaces are required. It supports three inputs and has two relay outputs and is equipped with ports for direct connection of an external loudspeaker, a microphone, a headset and a handset. Line-in and line-out jacks provide additional flexibility. The EB3E2A-AUD provides a secure, cost-efficient way of integrating inputs and outputs directly into the Intercom station. The resulting solution is suitable for implementing additional inputs and outputs for the control of external components. Installation is fast and easy: the expansion module connects to an Intercom station via a USB cable and is immediately ready for use.
Page
Event
Grid – Layout Top Usage: With the option: Layout - Top - the grid stretches behind the menu too. Roofline can be any text Header is H1 (headline 1) with the keyword for SEO Link (optional) Innovation knows no bounds in our world. We challenge conventions, pushing the boundaries of what's possible. Smart spatial solutions merge with cutting-edge technology, transcending mere utility to deliver an experience that is as functional as it is enchanting.
Product
OD10 SH
With the surface mount kit OD10 SH, a base module can be installed to any wall. The OD10 SH is especially designed for subsequent mounting to a wall or for mounting to thin walls. The surface mount kit OD10 SH can be mounted to a 2-fold flush-mounted wall box (acc. EN 60670-1; 60 mm/2.36 in screw distance). In combination with this surface mount kit, tamper detection is possible with an OD10 TD CM