Results (1371 found)
Product
EX 7504D 1 DC S H
By focusing on the highest safety levels, simple operation and future proof scalability, Commend’s Series EX 7000D is especially designed for communication in potentially explosive atmospheres. In order to verify their absolute reliability for use in Ex zones with hazardous gases or dusts, the Intercom stations are both ATEX-, CCC- and IECEx-certified. Based on a rugged, corrosion-resistant and lightweight “Ex e” polycarbonate housing, the Series EX 7000D enables simple and rapid installation, eliminates expensive routine servicing and drastically reduces maintenance costs. Additionally, the IP66 certification (acc. to EN/IEC 60079-0) and a wide permissible temperature range make the Intercom stations the perfect choice for a wide range of applications in explosive environments. Thanks to the dust- and water-insensitive microphones and the 16 kHz eHD Voice audio quality, the Series EX 7000D comes with highest speech intelligibility. Even in very noisy environments, two powerful amplifiers for the optional built-in loudspeaker and a connectable PA loudspeaker ensure a crystal clear sound. Furthermore, the microphone and the IVC feature (Intelligent Volume Control) allow to adjust the volume automatically to the ambient noise – even during playback.
Product
WS 200P D
Digital station with one or three programmable, back-lit direct dialling buttons, back-lit label areas The stations of this series are used as sub stations in interior and outdoor areas. The technology allows excellent speech quality and comprehensibility independent of background noise. Permanent function monitoring ensures in-service status. Each button can be assigned to a call number. Label areas for individual labelling of the buttons.
Product
ES 831A
The digital flushmount substations ES 831A is designed especially for building into American “2-gang” boxes. The intercom stations are manufactured in DSP-technology, which enables functions such as Audio-Monitoring or Loudspeaker/Microphone Monitoring. Silver button tamper resistant 2-wire substation with DSP-technology. Integrated digital duplex controller for optimal speech quality at the door, even from a distance or with high ambient noise levels. A protective plate in front of loudspeaker prevents possible damage. Can be connected to VirtuoSIS on-premise solutions with hardware and software servers via VirtuoSIS Link.
Product
G8A-T
Double Installation Board with 37-pin D-SUMBIN port for Plug-in Cards G8-GED, G8-GET and G8-AUD
Product
Series CLS 20 HG
The horn loudspeakers CLS 20 HG, CLS 20 HG70V and CLS 20 HG8 are suitable for speech and music signal transmission and can be used both for indoor and outdoor applications. Self-extinguishing ABS housing material in combination with a multi-stage swivel bracket made of V4A stainless steel (1.4571) resistance category III ensures durability and safety. The M20 cable gland provides protection against heavy water penetration. An additional hole in the pressure chamber allows the water to drain off after cleaning. This horn comes also equipped with a high-pass filter.
Product
SIP-WS 203V
The OpenDuplex capable and vandal resistant SIP stations have been developed and designed for areas with high requirements on safety. They are connected directly to the Ethernet (LAN/WAN) and in this manner are connected to a compatible SIP server via the IP network. The built-in switch with downlink function allows direct connection of an additional IP device (e.g. an IP camera). Besides high volume, the SIP stations provide a numerous amount of further features: Pre-recorded audio can be applied in a multi-purpose manner, e.g. as acoustic indication at line fault or as waiting infor- mation at call initiation. A configurable background noise suppression provides a crystal clear communication in challenging situations. Furthermore, the stations are perfectly suited for use as door stations at entrances and gateways, due to integrated relay outputs. The 3 mm stainless steel front panel with tamper protection and special screws protects against vandalism. The robust construction provides full protection against water, dirt and dust – IP rating IP66. Each button can be allocated to a call number and the relevant label area can be filled in individually. The red emergency call button is easily visible from a considerable distance and can be activated quickly in emergency situations.
Product
ET 962H
Hybrid IP-Intercom module with polycarbonate housing, built-in microphone, loudspeaker and connection ports for up to three call buttons. The IP Intercom module ET 962H has been developed for installation in existing housings or for construction of special Intercom terminals. As they support both IoIP connections and SIP solutions (hybrid), the IP Intercom modules can easily be integrated into any Voice over IP system as well as any existing Commend Intercom system. The desired operation mode is selected via the configuration software. Applications for the IP Intercom module ET 962H are all kinds of call and emergency call stations, where the station is built-in and only the external call button is used. This means, special solutions for e.g. emergency call pillars, elevator cabins, ticketing machines or barriers at entrances and exits can be created, which optimally satisfy function and optical appearance of the customer specifications. Furthermore, the modules are perfectly suited for use as door stations at entrance areas and gateways, due to two integrated relay outputs.
Product
EF 862AM
Weather and vandal resistant sub station with red mushroom call button for areas, in which high requirements of security are needed. With programmable call button, electret microphone and loudspeaker. Metal housing, resistant against dust and spray water. Front panel made of 3 mm (0.12 in) V-2A stainless steel (CrNi), with poke protection and special screws for protection against vandalism. Flush mount box GUEF 62 must be ordered separately. Several surface mount boxes available separately.
Product
OD10 SHR
With the surface mount kit OD10 SHR made of powder coated sheet steel, an od10 intercom station can be mounted together with an Universal Reader XDX UNIR on a wall. The OD10 SHR is primarily intended for subsequent mounting on a wall or for mounting on thin walls.
Product
WSRR 50V
High-grade steel Rain Protection Roof for Series WS V Intercom Stations; provides enhanced protection against environmental influences