Results (1371 found)


Product
Series CLS 30 HG
The CLS 30 HG is suitable for speech and music signal transmission and can be used both for indoor and outdoor applications. Self-extinguishing ABS housing material in combination with a multi-stage swivel bracket made of V4A stainless steel (1.4571), resistance category III ensures durability and safety. The M20 cable gland provides protection against heavy water penetration. An additional hole in the pressure chamber allows the water to drain off after cleaning. This horn comes also equipped with a high-pass filter.

Product
GUEF 62
Basic casing for surface mounting and flush mounting of Series EF 862 Intercom Stations, hot-galvanised sheet steel. Required for surface mounting and flush mounting.

Product
EE 320AS
The EE 320A is a wall mount master station like EE 311A. It has a handset function with automatic switching (with hands-free speech with excellent speech quality, when lifted out of the wall bracket with reduced volume). Colour: Black

Product
PA24W30V-EU
In security and communication solutions with high availability requirements, every element is important. That is why these carefully selected and technically mature power supplies are built durably and come equipped with components of the highest quality for long-term operation. Reliable operation of Intercom stations and servers is thus guaranteed around the clock.

Product
EX 7504D 2 AC S
By focusing on the highest safety levels, simple operation and future proof scalability, Commend’s Series EX 7000D is especially designed for communication in potentially explosive atmospheres. In order to verify their absolute reliability for use in Ex zones with hazardous gases or dusts, the Intercom stations are both ATEX-, CCC- and IECEx-certified. Based on a rugged, corrosion-resistant and lightweight “Ex e” polycarbonate housing, the Series EX 7000D enables simple and rapid installation, eliminates expensive routine servicing and drastically reduces maintenance costs. Additionally, the IP66 certification (acc. to EN/IEC 60079-0) and a wide permissible temperature range make the Intercom stations the perfect choice for a wide range of applications in explosive environments. Thanks to the dust- and water-insensitive microphones and the 16 kHz eHD Voice audio quality, the Series EX 7000D comes with highest speech intelligibility. Even in very noisy environments, two powerful amplifiers for the optional built-in loudspeaker and a connectable PA loudspeaker ensure a crystal clear sound. Furthermore, the microphone and the IVC feature (Intelligent Volume Control) allow to adjust the volume automatically to the ambient noise – even during playback.

Product
EB1A
With the USB output module EB1A, an EE 980 control desk can easily be expanded with a relay output (normally open contact) by simply connecting the EB1A to an available USB port of the station. As a result, a floating, galvanically-isolated output contact is available immediately – e.g. for use with a door opener. The USB output module can then comfortably be configured via the station’s web interface. Thanks to latest PhotoMOS technology, the EB1A has a very long service life. In contrast to an electromechanical design, this relay output does not age – no matter how many switching cycles it has to handle. That is why the USB output module is also recommended for use with permanent-blinking lights. This high flexibility and the ease of integration make the EB1A a cost-efficient solution wherever an output to switch loads is needed.

Product
EX 7P04D H
By focusing on the highest safety levels, simple operation and future proof scalability, Commend’s Series EX 7000D is especially designed for communication in potentially explosive atmospheres. In order to verify their absolute reliability for use in Ex zones with hazardous gases or dusts, the Intercom stations are both ATEX-, CCC- and IECEx-certified. Based on a rugged, corrosion-resistant and lightweight “Ex e” polycarbonate housing, the Series EX 7000D enables simple and rapid installation, eliminates expensive routine servicing and drastically reduces maintenance costs. Additionally, the IP66 certification (acc. to EN/IEC 60079-0) and a wide permissible temperature range make the Intercom stations the perfect choice for a wide range of applications in explosive environments. Thanks to the dust- and water-insensitive microphones and the 16 kHz eHD Voice audio quality, the Series EX 7000D comes with highest speech intelligibility. Even in very noisy environments, two powerful amplifiers for the optional built-in loudspeaker and a connectable PA loudspeaker ensure a crystal clear sound. Furthermore, the microphone and the IVC feature (Intelligent Volume Control) allow to adjust the volume automatically to the ambient noise – even during playback.

Product
AFIL USB
The AFIL-USB provides an easy way to fit Intercom stations with an induction loop for the hearing impaired. To install it, a free USB port is all that is needed. The compact size allows it to fit both into a surface and into a flush mount kit. Thanks to the user-friendly plug and play installation, the AFIL-USB is immediately ready for use. The AFIL-USB is developed in accordance with IEC 60118-4. This ensures an absolute “barrier-free communication” for people who depend on hearing aids.

Product
G3-TEL Interface Card
The G3-TEL multipurpose interface card builds a bridge between Intercom networks and telephone networks. Every interface card may be configured for one of the two possible modes: PABX mode: The Intercom stations can call any desired telephone number. Conversely, the Intercom stations can also be called from any telephone. In addition all Intercom functions can be activated via the DTMF keypad of the remote telephone, e.g. All Calls, Group Calls, Door Calls with after-dialling for door opening, etc. Auto dialler mode (alarm dialler): Calls and Call Requests from the Intercom Server initiate predefined dialling sequences. The called telephone receives a voice message identifying the calling station by means of integrated, user-configurable speech storage. The telephone can talk to the caller and, if required, activate remote access functions, e.g. open a door.