Results (1371 found)
Product
CLS 20 HG
The horn loudspeakers CLS 20 HG, CLS 20 HG70V and CLS 20 HG8 are suitable for speech and music signal transmission and can be used both for indoor and outdoor applications. Self-extinguishing ABS housing material in combination with a multi-stage swivel bracket made of V4A stainless steel (1.4571) resistance category III ensures durability and safety. The M20 cable gland provides protection against heavy water penetration. An additional hole in the pressure chamber allows the water to drain off after cleaning. This horn comes also equipped with a high-pass filter.
Product
WSSH 50PC B
The frame can be used wherever a shadow gap is not desired for surface mounting. Depending on the colour, it has the advantage of increasing the visibility of the Intercom station. Furthermore, the call station is better protected against spontaneous vandalism by the frame. The frame can be used in combination with polycarbonate wallmount stations as well as with membrane protected stations. To simplify cable routing for plaster mounting, the frame is equipped with cut-outs that can be fitted with the WSSH 50P cable gland. The frame is held to the wall by the WSSH 50P, but can optionally be fixed to the surface with up to six screws. The front panel can be removed using the removal kit. Colour blue corresponds to RAL 5015.
Product
PF-RM-1HE
19" rack mounting kit for one or two VirtuoSIS Link and AF 50 Amplifiers side by side or for rack mounting of one AF 125, AF 250 and AF 500 Amplifier - Height: 1U
Product
EE 380ABEGS
Base terminal including gooseneck microphone with cardioid polar pattern, active add-on loudspeaker, standard keypad and the possibility to connect up to four keypad modules EM 302EG. The mechanical screw and adhesive connection make these Intercom stations exceptionally robust. The buttons can be assigned to various functions, including direct dialling with call indication, triggering of output functions such as switching lighting circuits or managing doors and indicating input messages, for example, the status of doors, gates and barriers.
Product
SIP-WS 211V DA
While developing SIP-WS 211V DA, Commend’s commitment was to provide an Intercom station that was to be especially easy to operate by any user while providing clear intelligibility under all ambient conditions. The target was to build “the world’s most barrier-free Intercom station” that would support equal opportunities for impaired persons to participate in public life. The special Intercom station equipment developed for this purpose ranges from a special call button in contrasting colours for the visually impaired and extra large LED pictograms to HD Voice sound and inductive speech transmission. The resulting multi-purpose Intercom station even exceeds the official requirements for people with visual and hearing impairments and the accessibility regulations in accordance with the equal opportunities for the disabled principle (see “Two-Senses Principle”). What is more, the integrated IEC 60118-4 compliant induction loop system is setting new worldwide standards in Intercom barrier-freeness for the benefit of users and customers
Product
G3-8E8A
The input/output cards are part of the unique interface concept of the Intercom Server GE 300. They enable various control and indication functions and thus upgrade the Intercom Server to a universal control unit for all kinds of actors and sensors. The different designs of these cards allow flexible configuration, adapted to the customer‘s needs. The inputs read in floating contacts, the outputs are relay contacts, designed as make contact, open contact or changeover contact.
Product
Series ET 861A
The 2-wire door station module ET 861A was developed for use at doors and gates as well as entry ways and internal security gates. The elegant modern design is matched to the Vario 6 series from Siedle. Further function modules matching the door station module are available. This way, all areas to which a speech connection is required can be integrated into the Intercom system. Thus, all advantages of the Intercom system can be used — e.g. call transfer into the telephone or cellular network and networking. The door station module ET 861A uses the latest DSP technology, which allows functions like audio monitoring, loudspeaker/microphone surveillance or OpenDuplex . Typical applications of the door station module include speech solution at doors and gates, barriers and turnstiles. The ET 861A is available for flush as well as surface mounting and for integration in columns or letterbox systems.
Product
SIP-WS 200V
The OpenDuplex capable and vandal resistant SIP stations have been developed and designed for areas with high requirements on safety. They are connected directly to the Ethernet (LAN/WAN) and in this manner are connected to a compatible SIP server via the IP network. The built-in switch with downlink function allows direct connection of an additional IP device (e.g. an IP camera). Besides high volume, the SIP stations provide a numerous amount of further features: Pre-recorded audio can be applied in a multi-purpose manner, e.g. as acoustic indication at line fault or as waiting infor- mation at call initiation. A configurable background noise suppression provides a crystal clear communication in challenging situations. Furthermore, the stations are perfectly suited for use as door stations at entrances and gateways, due to integrated relay outputs. The 3 mm stainless steel front panel with tamper protection and special screws protects against vandalism. The robust construction provides full protection against water, dirt and dust – IP rating IP66. Each button can be allocated to a call number and the relevant label area can be filled in individually. The red emergency call button is easily visible from a considerable distance and can be activated quickly in emergency situations.
