Results (1372 found)
Product
ET 908H-1
The hybrid modules ET 908H (RJ45 jacks mounted horizontally) and ET 908H-1 (RJ45 jacks mounted vertically) have been developed for installation in existing housings or for construction of special Intercom stations. As they support both IoIP connections and SIP solutions (hybrid), the hybrid modules can easily be integrated into any Voice over IP system as well as any existing Commend Intercom system. The desired operation mode is selected via the configuration software. Applications for the hybrid modules are all kinds of call and emergency call stations, where the stations are built-in and only the external call buttons are used. This means, special solutions for e.g. emergency call pillars, elevator cabins, ticketing machines or barriers at entrances and exits can be created, which optimally satisfy function and optical appearance of the customer specifications. Furthermore, the hybrid modules are perfectly suited for use as door stations at entrance areas and gateways due to two integrated relay outputs.
Product
SOS-Button
The SOS button consists of an impact-resistant mast housing containing two loudspeakers, a microphone, an intercom module and an LTE router including antenna. The highly visible emergency call station is independent of the surrounding infrastructure and can be positioned almost anywhere in the city or community, depending on its use as an emergency call or information station - a suitable power supply is sufficient. The station provides acoustic and visual feedback on the operating status and operating steps. When a button is pressed, a direct voice connection is established to the centre providing assistance; a callback is also possible from there in order to provide the person seeking help with further information. The call station also has various options to make misuse more difficult. The many possible applications range from emergency call stations for parks and public places to information stations on public transport, at entrances suitable for the disabled and at information points, and can even be set up at short notice for special occasions or events. The emergency call or info call stations monitor themselves and report errors (via SNMP) to any location. The intercom stations are delivered to the installation site ready configured and only need to be installed and connected to the power supply.
Product
SIP-WS 800V
The OpenDuplex capable and vandal resistant SIP wallmount station SIP-WS 800V has been developed and designed for areas with high requirements on safety. The station is connected directly with the Ethernet (LAN/WAN) and in this manner it is connected to a compatible SIP server via the IP network. The built-in switch with downlink function allows direct connection of an additional IP device (e.g. an IP camera). Besides high volume, the SIP station provides a numerous amount of further features: Pre-recorded audio can be applied in a multi-purpose manner, e.g. as acoustic indication at line fault or as waiting information at call initiation. A configurable background noise suppression provides a crystal clear communication in challenging situations. Furthermore, the station is perfectly suited for use as door stations at entrances and gateways, due to integrated relay outputs. The 3 mm stainless steel front panel with tamper protection and special screws protects against vandalism. The robust construction provides full protection against water, dirt and dust – IP rating IP66
Product
AF 125
The AF 125H provides a high output range and various connections – from a microphone input to a relay output. That’s why the amplifier is universally suitable for any size of application – even for complex public address and Intercom solutions. In order to avoid cabling costs and be more flexible, the AF 125H is specifically optimised for installation either in a 19” rack or on-site. Thanks to its high flexibility, the AF 125H is applicable in the most diverse areas where a reliable and powerful public address is needed. Thereby, this amplifier covers all requirements from public service facilities, critical infrastructure and smart city applications, office and school buildings up to the requirements of challenging and high-noise industrial environments.
Product
EB3E2A-AUD
The expansion module EB3E2A-AUD provides an easy way to expand the inputs and outputs as well as the audio capabilities of an Intercom station. The expansion module is suitable for any applications where inputs and outputs and additional audio interfaces are required. It supports three inputs and has two relay outputs and is equipped with ports for direct connection of an external loudspeaker, a microphone, a headset and a handset. Line-in and line-out jacks provide additional flexibility. The EB3E2A-AUD provides a secure, cost-efficient way of integrating inputs and outputs directly into the Intercom station. The resulting solution is suitable for implementing additional inputs and outputs for the control of external components. Installation is fast and easy: the expansion module connects to an Intercom station via a USB cable and is immediately ready for use.
Product
EB 330AH
EB 330AH external cell electronics module for remote electronics installation (e.g. riser shaft) with terminal connection to an EF 031x front panel. The module is mounted on a fitting panel suitable for top-hat rail mounting. The other technical characteristics are the same as those of EB 330A.
Product
L3-AUD-4D
The digital Audio Recording Card G3-AUD for the Intercom Servers GE 300 provides four or two audio channels as Plug-&-Play interface to PA systems and Radio systems with up to 16 kHz audio bandwidth. All audio in- and outputs have level adjustment, a Graphic Equalizer for adjustment of the tone characteristics and are galvanically isolated. The G3-AUD card contains relay contacts, which can be used for any desired function.
Product
ID5 TD CM
Maximum flexible and compatible – that’s exactly what the Commend Indoor series provides. For the stylish Intercom stations, only high-quality materials such as glass, stainless steel and aluminium are used. Thanks to its flat housing and the timeless look, the Indoor series Intercom stations are perfectly designed for indoor use – whether on desks or walls. Each Indoor series Intercom station comes with a large 5” touch display. Crystal clear audio enables high speech intelligibility. Via the well-arranged, intuitive web interface, the Indoor series Intercom stations can quickly and easily be configured. Not only that: the flexible web interface allows to manage handset, gooseneck microphone, I/O module and induction loop. These add-ons are connected via the two USB slots on the rear. Silver edition