Results (1370 found)
Page
Communication élégante à bord des superyachts
Un yacht - une plateforme de communication IP Communication à bord des superyachts Les superyachts sont grands, luxueux et exigent une communication de qualité supérieure. Une intelligibilité vocale parfaite et une fiabilité maximale sont essentielles afin de garantir une communication à bord sans faille, quels que soient l'emplacement et les besoins des passagers. Avec Ognios by Commend, la qualité et l'individualité sont notre priorité absolue. C'est pourquoi Ognios by Commend représente une flexibilité maximale en termes de fonction et de design. Communiquer Avec l'équipe Informer Les passagers Unifier Communication sur les yachts Garantir La sécurité à bord Communication à bord Avec des stations d'interphonie certifiées maritimes, vous pouvez aisément communiquer avec l'équipage, demander de l'aide ou passer des commandes. L'équipage peut coordonner ses actions via ces stations d'interphone, que ce soit entre elles ou avec des téléphones mobiles et des téléphones de bureau SIP. La redondance du système, associée à une intelligibilité vocale parfaite garantissent la fiabilité de la communication à bord, améliorant l'efficacité opérationnelle , que ce soit en mode mains libres ou avec un combiné. Assistance aux passagers 24h/24 Les stations d'interphonie avec écran tactile offrent une manière élégante d'afficher des informations pour les passagers à bord du yacht . Elles permettent de contacter le steward d'un simple geste tactile et d'accéder à toutes les autres fonctions. Les stations tactiles sont protégées IP65 et sont disponibles avec des écrans de 5" ou 10". Les écrans et leur contenu peuvent être personnalisés, comme indiqué, pour informer, et un mode d'urgence dédié affiche des informations importantes en cas de situation d'urgence. Élimination des frontières du système et unification de la communication La passerelle d'un yacht est son centre de commande - son centre névralgique, où convergent d'innombrables fonctions et commandes. Pour assurer le bon déroulement des opérations sur la passerelle, une interface de communication unifiée pour les communications quotidiennes et critiques représente la solution technologique la plus éprouvée. Ognios by Commend intègre de manière transparente l'interphonie, la sonorisation, la téléphonie et la radiotéléphonie mobile sur une seule interface de communication unifiée sur les passerelles. La sécurité de l'équipage et des passagers : un élément primordial Le système de Public Address est l'un des éléments de communication les plus centraux à bord pour informer les passagers et l'équipage pendant les opérations et les avertir en cas de situations critiques. Les stations d'interphonie Ognios by Commend peuvent diffuser des annonces via une intégration transparente avec les systèmes de sonorisation PA/GA , permettant à l'équipage de répondre immédiatement aux annonces via les stations d'interphonie. Applications pour superyachts Unifier Modules et stations intégrés pour les passerelles Des postes d'interphonie modulaires et des modules, avec ou sans col de cygne ou bien encore combinés, offrent une communication unifiée pour l'interphonie, la sonorisation, la téléphonie et la radiotéléphonie mobile. Grâce à l'API d'Ognios, les fonctions d'interphonie peuvent également être affichées sur les écrans tactiles. Communication sur les ponts Communiquer Stations d'interphonie certifiées maritimes La modularité du système permet une grande flexibilité. Les modules haut-parleur, caméra, boutons d'appel, clavier et écran tactile peuvent être combinés en fonction des besoins individuels. Page produit Informer Sonorisation et alarme vocale Optez pour les solutions de sonorisation de Commend ou intégrez des systèmes de sonorisation et d'amplification vocale de fabricants de premier plan, tels que le système PRAESENSA de Bosch. En savoir plus Unifier Radio mobile Le système Ognios permet la communication radio mobile bidirectionnelle entre les appareils Motorola et le système ICOM grâce à la passerelle SMC ou à la passerelle RoIP VE-PG4, via SIP-Trunk. En savoir plus En savoir plus ? N'hésitez pas à nous contacter, nous serons ravis de vous présenter les options à votre disposition. Contactez-nous Panneaux d'alarme Modules d'interphonie apportant la communication aux panneaux d'alarme. En savoir plus Stations pour cabines de yacht Restez connecté avec tout l'équipage. En savoir plus Téléphones SIP Les téléphones SIP peuvent être intégrés de manière transparente dans le système Ognios. Brochure maritime Voir Bosch Praesensa Intégration Voir Caractéristiques & Avantages Plateforme de communication unifiée Divers systèmes de communication - Une plateforme. Intégration de la sonorisation, des téléphones et de la radiotéléphonie mobile pour former une plateforme de communication unifiée. Certifié maritime Les solutions de communication à bord sont certifiées maritimes conformément aux normes DNV, Rina et BSH. Interfaces & Intégrations Connectez le système à des solutions tiers et bénéficiez d'avantages grâce à l'automatisation, ou utilisez simplement les entrées/sorties pour contrôler les équipements. En savoir plus Cybersécurité Une sécurité à plusieurs niveaux, notamment par le chiffrement des transmissions de données. En savoir plus Intelligibilité vocale Excellente intelligibilité de la parole, quel que soit le bruit environnant. En savoir plus Haute disponibilité Haute disponibilité assurée par l'autocontrôle de bout en bout et à la redondance des serveurs. En savoir plus Produits de pointe Certifié maritime Certifié maritime La modularité du système permet une grande flexibilité. Les modules d'Ognios peuvent être facilement combinés entre eux, selon vos besoins individuels. Page produit Stations d'interphonie IP à écran tactile Stations protégées IP 65 avec écrans tactiles polyvalents pour des affichages individuels, y compris le mode publicité et d'urgence. Page produit Illustration du système
Page
Detail
Organizational information Level A training courses take place on three consecutive days, each from 09:00 to 17:00. From Level B, the training courses take place on two consecutive days, each from 09:00 to 17:00. The number of participants is limited to a maximum of 8 participants at Schneider Intercom Technical equipment - For a successful participation each participant needs Notebook (at least Windows 10 Professional (x64) from version 20H2) Administrator rights (ability to install software and full access to the network card settings) Browser: Google Chrome (current version) Current .NET framework WLAN Ethernet interface Software installed before the start of the course: Commend Installer package (CCT800, IP Station Config, ComLOG, VirtuoBro), Commend Set-UP, Wireshark Level C only additionally: ComPLC, current version Level D only additionally: Activation of Hyper-V. Instructions for preparing the notebook will be sent to participants before the start of the course. Registrations will be considered in the order in which they are received. Please provide the full names and e-mail addresses of the participants when booking. Participants will receive a confirmation of registration from Schneider Intercom with the exact address of the training location for classroom training or the access data for online training. Participants will also receive access data to our online cLibrary and to our English-language training program with additional training courses. Access to the training platform is limited to one year from confirmation of registration for the training course. If the number of registrations for a training course is too low, we reserve the right not to hold the course. In this case, we may offer you alternative dates. We reserve the right to change dates at short notice due to the number of participants. Each participant will need their own notebook for programming and exercises. The software required for the training should be installed in advance; this software will be made available to the participants separately with instructions for installation. The conference fee is EUR 390 per person per day. This amount includes the costs for training documents, conference drinks and meals during the classroom training, as well as annual access to our English-language training courses. You will receive an invoice for the course fees. On receipt of the invoice, we request a bank transfer, payable immediately without deduction. Travel costs to and from the training location and hotel accommodation for classroom training courses are to be borne by the participant.
Page
Detail
Organizational information Level A training courses take place on three consecutive days, each from 09:00 to 17:00. From Level B, the training courses take place on two consecutive days, each from 09:00 to 17:00. The number of participants is limited to a maximum of 8 participants at Schneider Intercom Technical equipment - For a successful participation each participant needs Notebook (at least Windows 10 Professional (x64) from version 20H2) Administrator rights (ability to install software and full access to the network card settings) Browser: Google Chrome (current version) Current .NET framework WLAN Ethernet interface Software installed before the start of the course: Commend Installer package (CCT800, IP Station Config, ComLOG, VirtuoBro), Commend Set-UP, Wireshark Level C only additionally: ComPLC, current version Level D only additionally: Activation of Hyper-V. Instructions for preparing the notebook will be sent to participants before the start of the course. Registrations will be considered in the order in which they are received. Please provide the full names and e-mail addresses of the participants when booking. Participants will receive a confirmation of registration from Schneider Intercom with the exact address of the training location for classroom training or the access data for online training. Participants will also receive access data to our online cLibrary and to our English-language training program with additional training courses. Access to the training platform is limited to one year from confirmation of registration for the training course. If the number of registrations for a training course is too low, we reserve the right not to hold the course. In this case, we may offer you alternative dates. We reserve the right to change dates at short notice due to the number of participants. Each participant will need their own notebook for programming and exercises. The software required for the training should be installed in advance; this software will be made available to the participants separately with instructions for installation. The conference fee is EUR 390 per person per day. This amount includes the costs for training documents, conference drinks and meals during the classroom training, as well as annual access to our English-language training courses. You will receive an invoice for the course fees. On receipt of the invoice, we request a bank transfer, payable immediately without deduction. Travel costs to and from the training location and hotel accommodation for classroom training courses are to be borne by the participant.
Page
Modul F
Training Area Module F - Cloud Overview of all training courses Module F - Cloud focuses on the implementation of projects in which our cloud solutions are to be integrated. It provides knowledge about the Symphony Cloud, Management Cloud, and our AI-based virtual assistant ivy. Title Start date End date Location Free places Modul F1 - Cloud 25.03.2026 26.03.2026 Düsseldorf, Deutschland 4 Modul F2 - Cloud 06.10.2026 07.10.2026 Düsseldorf, Deutschland 8
Page
Detail
Organizational information Level A training courses take place on three consecutive days, each from 09:00 to 17:00. From Level B, the training courses take place on two consecutive days, each from 09:00 to 17:00. The number of participants is limited to a maximum of 8 participants at Schneider Intercom Technical equipment - For a successful participation each participant needs Notebook (at least Windows 10 Professional (x64) from version 20H2) Administrator rights (ability to install software and full access to the network card settings) Browser: Google Chrome (current version) Current .NET framework WLAN Ethernet interface Software installed before the start of the course: Commend Installer package (CCT800, IP Station Config, ComLOG, VirtuoBro), Commend Set-UP, Wireshark Level C only additionally: ComPLC, current version Level D only additionally: Activation of Hyper-V. Instructions for preparing the notebook will be sent to participants before the start of the course. Registrations will be considered in the order in which they are received. Please provide the full names and e-mail addresses of the participants when booking. Participants will receive a confirmation of registration from Schneider Intercom with the exact address of the training location for classroom training or the access data for online training. Participants will also receive access data to our online cLibrary and to our English-language training program with additional training courses. Access to the training platform is limited to one year from confirmation of registration for the training course. If the number of registrations for a training course is too low, we reserve the right not to hold the course. In this case, we may offer you alternative dates. We reserve the right to change dates at short notice due to the number of participants. Each participant will need their own notebook for programming and exercises. The software required for the training should be installed in advance; this software will be made available to the participants separately with instructions for installation. The conference fee is EUR 390 per person per day. This amount includes the costs for training documents, conference drinks and meals during the classroom training, as well as annual access to our English-language training courses. You will receive an invoice for the course fees. On receipt of the invoice, we request a bank transfer, payable immediately without deduction. Travel costs to and from the training location and hotel accommodation for classroom training courses are to be borne by the participant.
Page
Detail
Organizational information Level A training courses take place on three consecutive days, each from 09:00 to 17:00. From Level B, the training courses take place on two consecutive days, each from 09:00 to 17:00. The number of participants is limited to a maximum of 8 participants at Schneider Intercom Technical equipment - For a successful participation each participant needs Notebook (at least Windows 10 Professional (x64) from version 20H2) Administrator rights (ability to install software and full access to the network card settings) Browser: Google Chrome (current version) Current .NET framework WLAN Ethernet interface Software installed before the start of the course: Commend Installer package (CCT800, IP Station Config, ComLOG, VirtuoBro), Commend Set-UP, Wireshark Level C only additionally: ComPLC, current version Level D only additionally: Activation of Hyper-V. Instructions for preparing the notebook will be sent to participants before the start of the course. Registrations will be considered in the order in which they are received. Please provide the full names and e-mail addresses of the participants when booking. Participants will receive a confirmation of registration from Schneider Intercom with the exact address of the training location for classroom training or the access data for online training. Participants will also receive access data to our online cLibrary and to our English-language training program with additional training courses. Access to the training platform is limited to one year from confirmation of registration for the training course. If the number of registrations for a training course is too low, we reserve the right not to hold the course. In this case, we may offer you alternative dates. We reserve the right to change dates at short notice due to the number of participants. Each participant will need their own notebook for programming and exercises. The software required for the training should be installed in advance; this software will be made available to the participants separately with instructions for installation. The conference fee is EUR 390 per person per day. This amount includes the costs for training documents, conference drinks and meals during the classroom training, as well as annual access to our English-language training courses. You will receive an invoice for the course fees. On receipt of the invoice, we request a bank transfer, payable immediately without deduction. Travel costs to and from the training location and hotel accommodation for classroom training courses are to be borne by the participant.
Page
Detail
Organizational information Level A training courses take place on three consecutive days, each from 09:00 to 17:00. From Level B, the training courses take place on two consecutive days, each from 09:00 to 17:00. The number of participants is limited to a maximum of 8 participants at Schneider Intercom Technical equipment - For a successful participation each participant needs Notebook (at least Windows 10 Professional (x64) from version 20H2) Administrator rights (ability to install software and full access to the network card settings) Browser: Google Chrome (current version) Current .NET framework WLAN Ethernet interface Software installed before the start of the course: Commend Installer package (CCT800, IP Station Config, ComLOG, VirtuoBro), Commend Set-UP, Wireshark Level C only additionally: ComPLC, current version Level D only additionally: Activation of Hyper-V. Instructions for preparing the notebook will be sent to participants before the start of the course. Registrations will be considered in the order in which they are received. Please provide the full names and e-mail addresses of the participants when booking. Participants will receive a confirmation of registration from Schneider Intercom with the exact address of the training location for classroom training or the access data for online training. Participants will also receive access data to our online cLibrary and to our English-language training program with additional training courses. Access to the training platform is limited to one year from confirmation of registration for the training course. If the number of registrations for a training course is too low, we reserve the right not to hold the course. In this case, we may offer you alternative dates. We reserve the right to change dates at short notice due to the number of participants. Each participant will need their own notebook for programming and exercises. The software required for the training should be installed in advance; this software will be made available to the participants separately with instructions for installation. The conference fee is EUR 390 per person per day. This amount includes the costs for training documents, conference drinks and meals during the classroom training, as well as annual access to our English-language training courses. You will receive an invoice for the course fees. On receipt of the invoice, we request a bank transfer, payable immediately without deduction. Travel costs to and from the training location and hotel accommodation for classroom training courses are to be borne by the participant.
Page
Modul A
Training Area MODULE A - INTRODUCTION & BASICS Overview of all training courses This product training course provides you with an overview of our Symphony intercom terminals, VirtuoSIS intercom servers, classic intercom stations and servers, serverless operation, and our Symphony Cloud. Note: The Module A course has been extended to three days to cover a more comprehensive range of topics. This allows us to ensure that participants gain an in-depth understanding of all relevant aspects and are better prepared for the challenges they face in their day-to-day work. Title Start date End date Location Free places Modul A1 - Einführung & Basics 18.02.2026 20.02.2026 Düsseldorf, Deutschland 5 Modul A2 - Einführung & Basics 09.03.2026 11.03.2026 Düsseldorf, Deutschland 6 Modul A3 - Einführung & Basics 14.04.2026 16.04.2026 Düsseldorf, Deutschland 8 Modul A4 - Einführung & Basics 18.05.2026 20.05.2026 Düsseldorf, Deutschland 8 Modul A5 - Einführung & Basics 23.06.2026 26.06.2026 Düsseldorf, Deutschland 8 Modul A6 - Einführung & Basics 06.07.2026 08.07.2026 Düsseldorf, Deutschland 8 Modul A7 - Einführung & Basics 11.08.2026 13.08.2026 Düsseldorf, Deutschland 8 Modul A8 - Einführung & Basics 29.09.2026 01.10.2026 Düsseldorf, Deutschland 8 Modul A9 - Einführung & Basics 12.10.2026 14.10.2026 Düsseldorf, Deutschland 8 Modul A10 - Einführung & Basics 10.11.2026 12.11.2026 Düsseldorf, Deutschland 8
Page
Modul D
Training Area MODULE D - SYMPHONY ADVANCED Overview of all training courses In Module D - Symphony Advanced, technicians who have already completed Module A or Module B training are trained in network technology and IT security, as well as VirtuoSIS and server redundancy. Note: *Module C – SymMX & ComPLC can be booked as an optional extension to selected D modules for an additional training day. Title Start date End date Location Free places Modul D1* - Symphony Advanced 28.04.2026 29.04.2026 Düsseldorf, Deutschland 7 Modul D2 - Symphony Advanced 08.12.2026 09.12.2026 Düsseldorf, Deutschland 8
Page
Modul G
Training Area MODULE G - FOLLOW UP Overview of all training courses The follow-up training is for experienced users and provides information on the latest features; participation every two years is mandatory in order to maintain “Certified Partner” status. Title Start date End date Location Free places Modul G1 - Follow Up 09.06.2026 09.06.2026 Online 96