Results (1418 found)
Product
EX 7008D H
By focusing on the highest safety levels, simple operation and future proof scalability, Commend’s Series EX 7000D is especially designed for communication in potentially explosive atmospheres. In order to verify their absolute reliability for use in Ex zones with hazardous gases or dusts, the Intercom stations are both ATEX-, CCC- and IECEx-certified. Based on a rugged, corrosion-resistant and lightweight “Ex e” polycarbonate housing, the Series EX 7000D enables simple and rapid installation, eliminates expensive routine servicing and drastically reduces maintenance costs. Additionally, the IP66 certification (acc. to EN/IEC 60079-0) and a wide permissible temperature range make the Intercom stations the perfect choice for a wide range of applications in explosive environments. Thanks to the dust- and water-insensitive microphones and the 16 kHz eHD Voice audio quality, the Series EX 7000D comes with highest speech intelligibility. Even in very noisy environments, two powerful amplifiers for the optional built-in loudspeaker and a connectable PA loudspeaker ensure a crystal clear sound. Furthermore, the microphone and the IVC feature (Intelligent Volume Control) allow to adjust the volume automatically to the ambient noise – even during playback.
Product
G8-AUD Interface Card
The digital Audio Recording Card G8-AUD for the Intercom Servers GE 800 provides four or two audio channels as Plug-&-Play interface to PA systems and Radio systems with up to 16 kHz audio bandwidth. All audio in- and outputs have level adjustment, a Graphic Equalizer for adjustment of the tone characteristics and are galvanically isolated. The G8-AUD card contains relay contacts, which can be used for any desired function.
Product
CLS 6 CIBW
One-piece ceiling loudspeaker with ball-proof grille, suitable for installation in ceilings of all kinds. The 130 mm chassis with tweeter cone impresses with a high sound pressure level and an excellent frequency range. Quick mounting in a few seconds is ensured by our quick mounting system, using stainless steel spring clips. The membrane is impregnated and protected against moisture. The fire protection enclosure contains the loudspeaker, no separate mounting of the enclosure is necessary. Suitable for EVAC applications according to DIN 60849.
Product
ET 861ADG
The 2-wire door station module ET 861A was developed for use at doors and gates as well as entry ways and internal security gates. The elegant modern design is matched to the Vario 6 series from Siedle. Further function modules matching the door station module are available. This way, all areas to which a speech connection is required can be integrated into the Intercom system. Thus, all advantages of the Intercom system can be used — e.g. call transfer into the telephone or cellular network and networking. The door station module ET 861A uses the latest DSP technology, which allows functions like audio monitoring, loud- speaker/microphone surveillance or OpenDuplex® . Typical applications of the door station module include speech solution at doors and gates, barriers and turnstiles. The ET 861A is available for flush as well as surface mounting and for integration in columns or letterbox systems
Product
L3-WAN-8
The G3-LAN network cards are the solution to the challenge of IoIP – Intercom over IP: GE 300 and / or GE 800 Intercom Servers can be networked in IP-networks via Ethernet connections. The IP network card supports central management of up to 16 Intercom servers. Up to 8 conversations, music programmes or radio channels are supported simultaneously. For more details see datasheet or manual. Connection is via the network connection port of the IP Intercom Server.
Product
WS 201V D
Digital station with programmable, back-lit direct dialling buttons, back-lit label areas, electret condenser microphone with multifunction LED. Vandal-resistant sub stations designed for areas with high requirements on safety. The technology allows excellent speech quality and comprehensibility independent of background noise. Permanent function monitoring ensures in-service status and the 3 mm stainless steel front panel with poke protection and special screws protects against vandalism. No water spray, dirt or dust can penetrate the compact construction – protection class IP66. Each button can be allocated to a call number and the relevant label area can be filled in individually.
Product
EE 7504D AC S H
Industrial Intercom Station with full keypad, 4 function buttons, loudspeaker, handset and AC power supply
Product
WSSH 50PC Y
The frame can be used wherever a shadow gap is not desired for surface mounting. Depending on the colour, it has the advantage of increasing the visibility of the Intercom station. Furthermore, the call station is better protected against spontaneous vandalism by the frame. The frame can be used in combination with polycarbonate wallmount stations as well as with membrane protected stations. To simplify cable routing for plaster mounting, the frame is equipped with cut-outs that can be fitted with the WSSH 50P cable gland. The frame is held to the wall by the WSSH 50P, but can optionally be fixed to the surface with up to six screws. The front panel can be removed using the removal kit. Colour yellow corresponds to RAL 1018.
Product
PA1-S6
300 Watt pluggable Power Supply for S6 Servers, input: 100–240 VAC with IEC-60320-C14 connection (IEC cable KAB-C13 not included).
