Results (1418 found)
Product
ES 831A
The digital flushmount substations ES 831A is designed especially for building into American “2-gang” boxes. The intercom stations are manufactured in DSP-technology, which enables functions such as Audio-Monitoring or Loudspeaker/Microphone Monitoring. Silver button tamper resistant 2-wire substation with DSP-technology. Integrated digital duplex controller for optimal speech quality at the door, even from a distance or with high ambient noise levels. A protective plate in front of loudspeaker prevents possible damage. Can be connected to VirtuoSIS on-premise solutions with hardware and software servers via VirtuoSIS Link.
Product
G8A-T
Double Installation Board with 37-pin D-SUMBIN port for Plug-in Cards G8-GED, G8-GET and G8-AUD
Product
OD10 FB
With the drywall/panel mount kit OD10 FB, a base module can be installed e.g. to a gypsum wallboard. The OD10 FB is designed for wall mounting during the construction or renovation phase. In combination with this drywall/panel mount kit, tamper detection is possible with an OD10 TD CM.
Product
EE 7P04D DC H
Industrial Intercom Station with party-line keypad, 4 function buttons, handset and DC power supply
Product
EX 7008D 2 DC S
By focusing on the highest safety levels, simple operation and future proof scalability, Commend’s Series EX 7000D is especially designed for communication in potentially explosive atmospheres. In order to verify their absolute reliability for use in Ex zones with hazardous gases or dusts, the Intercom stations are both ATEX-, CCC- and IECEx-certified. Based on a rugged, corrosion-resistant and lightweight “Ex e” polycarbonate housing, the Series EX 7000D enables simple and rapid installation, eliminates expensive routine servicing and drastically reduces maintenance costs. Additionally, the IP66 certification (acc. to EN/IEC 60079-0) and a wide permissible temperature range make the Intercom stations the perfect choice for a wide range of applications in explosive environments. Thanks to the dust- and water-insensitive microphones and the 16 kHz eHD Voice audio quality, the Series EX 7000D comes with highest speech intelligibility. Even in very noisy environments, two powerful amplifiers for the optional built-in loudspeaker and a connectable PA loudspeaker ensure a crystal clear sound. Furthermore, the microphone and the IVC feature (Intelligent Volume Control) allow to adjust the volume automatically to the ambient noise – even during playback.
Product
EX 7008D 2 AC S
By focusing on the highest safety levels, simple operation and future proof scalability, Commend’s Series EX 7000D is especially designed for communication in potentially explosive atmospheres. In order to verify their absolute reliability for use in Ex zones with hazardous gases or dusts, the Intercom stations are both ATEX-, CCC- and IECEx-certified. Based on a rugged, corrosion-resistant and lightweight “Ex e” polycarbonate housing, the Series EX 7000D enables simple and rapid installation, eliminates expensive routine servicing and drastically reduces maintenance costs. Additionally, the IP66 certification (acc. to EN/IEC 60079-0) and a wide permissible temperature range make the Intercom stations the perfect choice for a wide range of applications in explosive environments. Thanks to the dust- and water-insensitive microphones and the 16 kHz eHD Voice audio quality, the Series EX 7000D comes with highest speech intelligibility. Even in very noisy environments, two powerful amplifiers for the optional built-in loudspeaker and a connectable PA loudspeaker ensure a crystal clear sound. Furthermore, the microphone and the IVC feature (Intelligent Volume Control) allow to adjust the volume automatically to the ambient noise – even during playback.
Product
Series CLS 20 HG
The horn loudspeakers CLS 20 HG, CLS 20 HG70V and CLS 20 HG8 are suitable for speech and music signal transmission and can be used both for indoor and outdoor applications. Self-extinguishing ABS housing material in combination with a multi-stage swivel bracket made of V4A stainless steel (1.4571) resistance category III ensures durability and safety. The M20 cable gland provides protection against heavy water penetration. An additional hole in the pressure chamber allows the water to drain off after cleaning. This horn comes also equipped with a high-pass filter.
Product
OD10 SHR
With the surface mount kit OD10 SHR made of powder coated sheet steel, an od10 intercom station can be mounted together with an Universal Reader XDX UNIR on a wall. The OD10 SHR is primarily intended for subsequent mounting on a wall or for mounting on thin walls.
Product
WSRR 50V
High-grade steel Rain Protection Roof for Series WS V Intercom Stations; provides enhanced protection against environmental influences
Product
EX 7P04D 2 AC S
By focusing on the highest safety levels, simple operation and future proof scalability, Commend’s Series EX 7000D is especially designed for communication in potentially explosive atmospheres. In order to verify their absolute reliability for use in Ex zones with hazardous gases or dusts, the Intercom stations are both ATEX-, CCC- and IECEx-certified. Based on a rugged, corrosion-resistant and lightweight “Ex e” polycarbonate housing, the Series EX 7000D enables simple and rapid installation, eliminates expensive routine servicing and drastically reduces maintenance costs. Additionally, the IP66 certification (acc. to EN/IEC 60079-0) and a wide permissible temperature range make the Intercom stations the perfect choice for a wide range of applications in explosive environments. Thanks to the dust- and water-insensitive microphones and the 16 kHz eHD Voice audio quality, the Series EX 7000D comes with highest speech intelligibility. Even in very noisy environments, two powerful amplifiers for the optional built-in loudspeaker and a connectable PA loudspeaker ensure a crystal clear sound. Furthermore, the microphone and the IVC feature (Intelligent Volume Control) allow to adjust the volume automatically to the ambient noise – even during playback.