Results (1417 found)
Page
Stylish Communication Systems for Superyachts
One Yacht – One IP Communication Platform Onboard Communication for Superyachts Superyachts are big, luxurious and for this reason, face-to-face communication is often not enough. That's why all passengers deserve the best possible communication system – with perfect speech intelligibility and highest reliability to ensure flawless onboard communication whenever needed and no matter where you are. With Ognios by Commend, not only quality but also individuality have top priority. This is why Ognios by Commend stands for maximum flexibility in function AND design. Communicating with the Crew Informing Passengers Unifying Yacht Communication Ensuring Safety on board Onboard Communication With maritime certified Intercom stations you can easily contact the crew, call for assistance or just order a meal in the yacht's galley. The crew can coordinate via the intercom stations not only from one intercom station to another, but also from an intercom station to any mobile phone or even to a SIP desk phone. System redundancy combined with perfect speech intelligibility make your onboard communication failsafe and increase operational efficiency – handsfree or with handset. Round-The-Clock Passenger Assistance Intercom Stations with Touchscreen are an elegant way to display information specifically for guests and passengers on the yacht. The ship's steward can be contacted with a simple touch gesture and all other functions can be displayed on the touch screens. Touchscreen station are IP65 protected and are available with 5" or 10" screens. The screens and content can be customised as mentioned to inform and a dedicated emergency mode displays important information in emergency situations. Removing System Boundaries and Unifying Communication A yacht‘s bridge is its central command and control centre – its nerve centre, where countless functions and controls converge. To keep everything running smoothly on the bridge, a unified communication interface for everyday and critical communication is the proven state of the art. Ognios by Commend brings Intercom, PA/GA, Telephony and Mobile Radio seamlessly together on a single unified communication user interface on bridges. The Safety of Crew and Passengers is the most important Aspect The public address system is one of the most central communication elements on board to inform passengers and crew during operation and to warn them in critical situations. Ognios by Commend Intercom stations can deliver announcements through seamless integration with PA/GA systems and be used to make announcements. In addition, the crew can respond immediately to the announcements and answer via the Intercom stations. Applications for Superyachts Unifying Build-in Modules and Stations for Bridges Modular bridge intercom stations and modules – optionally with or without gooseneck or handset for unified communication for Intercom, PA/GA, telephony and mobile radio. Via the Ognios API, intercom functions can also be called up on touchscreens. Bridge Communication Communicating Maritime Certified Intercom Stations The modularity of the system allows for great flexibility. Loudspeaker, camera, call buttons, keypad and touchscreen modules can be combined according to the individual needs. Product Page Informing Public Address and Voice Alarm Choose from Commend PA solutions or integration options of PA and PA/GA systems from leading manufacturers like PRAESENSA Public Address & Voice Alarm system from Bosch. Learn more Unifying Mobile Radio The Ognios system can be connected to Motorola Devices via SMC Gateway or with VE-PG4 RoIP Gateway to the ICOM system to enable two way mobile radio communication between these two worlds via SIP-Trunk. Read more Find out more? Get in touch and we will be pleased to explain the manifold possibilities to you. Contact us Alarm Panels Intercom modules bringing communication to alarm panels. Learn more Stations for Yacht Cabins Stay connected with the whole crew. Learn more SIP Telephones SIP telephones can be integrated seamlessly into the Ognios system. Maritime Brochure View Bosch Praesensa Integration View Features & Benefits Unified Communication Platform Different Communication Systems – One Platform. Integration of PA/GA, telephones and mobile radio to form a unified communication platform. Maritime Certified Solutions for onboard communication are maritime certified according to DNV, Rina and BSH. Interfaces & Integrations Connect the system with various other systems and get unique benefits through automatisation or just use the I/Os to control equipment. Learn more Cyber Security The security-specific hardening of Commend systems spans several levels starting with encryption of data transmissions. Learn more Speech Intelligibility Superior speech intelligibility regardless of background noise. Learn more High Availability High availability through end-to-end self-monitoring and server redundancy features. Learn more Top Products Maritime Certified Modular IP Intercom Station The modularity of the system allows for great flexibility. Ognios Modules can be easily combined with each other and according to your individual needs. Product Page IP Touchscreen Intercom Stations IP 65 protected stations with versatile touchscreens for individual screens incl. advertising and emergency mode. Product Page System Illustration
Page
Detail
Organizational information Level A training courses take place on three consecutive days, each from 09:00 to 17:00. From Level B, the training courses take place on two consecutive days, each from 09:00 to 17:00. The number of participants is limited to a maximum of 8 participants at Schneider Intercom Technical equipment - For a successful participation each participant needs Notebook (at least Windows 10 Professional (x64) from version 20H2) Administrator rights (ability to install software and full access to the network card settings) Browser: Google Chrome (current version) Current .NET framework WLAN Ethernet interface Software installed before the start of the course: Commend Installer package (CCT800, IP Station Config, ComLOG, VirtuoBro), Commend Set-UP, Wireshark Level C only additionally: ComPLC, current version Level D only additionally: Activation of Hyper-V. Instructions for preparing the notebook will be sent to participants before the start of the course. Registrations will be considered in the order in which they are received. Please provide the full names and e-mail addresses of the participants when booking. Participants will receive a confirmation of registration from Schneider Intercom with the exact address of the training location for classroom training or the access data for online training. Participants will also receive access data to our online cLibrary and to our English-language training program with additional training courses. Access to the training platform is limited to one year from confirmation of registration for the training course. If the number of registrations for a training course is too low, we reserve the right not to hold the course. In this case, we may offer you alternative dates. We reserve the right to change dates at short notice due to the number of participants. Each participant will need their own notebook for programming and exercises. The software required for the training should be installed in advance; this software will be made available to the participants separately with instructions for installation. The conference fee is EUR 390 per person per day. This amount includes the costs for training documents, conference drinks and meals during the classroom training, as well as annual access to our English-language training courses. You will receive an invoice for the course fees. On receipt of the invoice, we request a bank transfer, payable immediately without deduction. Travel costs to and from the training location and hotel accommodation for classroom training courses are to be borne by the participant.
Page
Modul F
Training Area Module F - Cloud Overview of all training courses Module F - Cloud focuses on the implementation of projects in which our cloud solutions are to be integrated. It provides knowledge about the Symphony Cloud, Management Cloud, and our AI-based virtual assistant ivy. Title Start date End date Location Free places Modul F1 - Cloud 25.03.2026 26.03.2026 Düsseldorf, Deutschland 4 Modul F2 - Cloud 06.10.2026 07.10.2026 Düsseldorf, Deutschland 8
Page
Detail
Organizational information Level A training courses take place on three consecutive days, each from 09:00 to 17:00. From Level B, the training courses take place on two consecutive days, each from 09:00 to 17:00. The number of participants is limited to a maximum of 8 participants at Schneider Intercom Technical equipment - For a successful participation each participant needs Notebook (at least Windows 10 Professional (x64) from version 20H2) Administrator rights (ability to install software and full access to the network card settings) Browser: Google Chrome (current version) Current .NET framework WLAN Ethernet interface Software installed before the start of the course: Commend Installer package (CCT800, IP Station Config, ComLOG, VirtuoBro), Commend Set-UP, Wireshark Level C only additionally: ComPLC, current version Level D only additionally: Activation of Hyper-V. Instructions for preparing the notebook will be sent to participants before the start of the course. Registrations will be considered in the order in which they are received. Please provide the full names and e-mail addresses of the participants when booking. Participants will receive a confirmation of registration from Schneider Intercom with the exact address of the training location for classroom training or the access data for online training. Participants will also receive access data to our online cLibrary and to our English-language training program with additional training courses. Access to the training platform is limited to one year from confirmation of registration for the training course. If the number of registrations for a training course is too low, we reserve the right not to hold the course. In this case, we may offer you alternative dates. We reserve the right to change dates at short notice due to the number of participants. Each participant will need their own notebook for programming and exercises. The software required for the training should be installed in advance; this software will be made available to the participants separately with instructions for installation. The conference fee is EUR 390 per person per day. This amount includes the costs for training documents, conference drinks and meals during the classroom training, as well as annual access to our English-language training courses. You will receive an invoice for the course fees. On receipt of the invoice, we request a bank transfer, payable immediately without deduction. Travel costs to and from the training location and hotel accommodation for classroom training courses are to be borne by the participant.
Page
Detail
Organizational information Level A training courses take place on three consecutive days, each from 09:00 to 17:00. From Level B, the training courses take place on two consecutive days, each from 09:00 to 17:00. The number of participants is limited to a maximum of 8 participants at Schneider Intercom Technical equipment - For a successful participation each participant needs Notebook (at least Windows 10 Professional (x64) from version 20H2) Administrator rights (ability to install software and full access to the network card settings) Browser: Google Chrome (current version) Current .NET framework WLAN Ethernet interface Software installed before the start of the course: Commend Installer package (CCT800, IP Station Config, ComLOG, VirtuoBro), Commend Set-UP, Wireshark Level C only additionally: ComPLC, current version Level D only additionally: Activation of Hyper-V. Instructions for preparing the notebook will be sent to participants before the start of the course. Registrations will be considered in the order in which they are received. Please provide the full names and e-mail addresses of the participants when booking. Participants will receive a confirmation of registration from Schneider Intercom with the exact address of the training location for classroom training or the access data for online training. Participants will also receive access data to our online cLibrary and to our English-language training program with additional training courses. Access to the training platform is limited to one year from confirmation of registration for the training course. If the number of registrations for a training course is too low, we reserve the right not to hold the course. In this case, we may offer you alternative dates. We reserve the right to change dates at short notice due to the number of participants. Each participant will need their own notebook for programming and exercises. The software required for the training should be installed in advance; this software will be made available to the participants separately with instructions for installation. The conference fee is EUR 390 per person per day. This amount includes the costs for training documents, conference drinks and meals during the classroom training, as well as annual access to our English-language training courses. You will receive an invoice for the course fees. On receipt of the invoice, we request a bank transfer, payable immediately without deduction. Travel costs to and from the training location and hotel accommodation for classroom training courses are to be borne by the participant.
Page
Detail
Organizational information Level A training courses take place on three consecutive days, each from 09:00 to 17:00. From Level B, the training courses take place on two consecutive days, each from 09:00 to 17:00. The number of participants is limited to a maximum of 8 participants at Schneider Intercom Technical equipment - For a successful participation each participant needs Notebook (at least Windows 10 Professional (x64) from version 20H2) Administrator rights (ability to install software and full access to the network card settings) Browser: Google Chrome (current version) Current .NET framework WLAN Ethernet interface Software installed before the start of the course: Commend Installer package (CCT800, IP Station Config, ComLOG, VirtuoBro), Commend Set-UP, Wireshark Level C only additionally: ComPLC, current version Level D only additionally: Activation of Hyper-V. Instructions for preparing the notebook will be sent to participants before the start of the course. Registrations will be considered in the order in which they are received. Please provide the full names and e-mail addresses of the participants when booking. Participants will receive a confirmation of registration from Schneider Intercom with the exact address of the training location for classroom training or the access data for online training. Participants will also receive access data to our online cLibrary and to our English-language training program with additional training courses. Access to the training platform is limited to one year from confirmation of registration for the training course. If the number of registrations for a training course is too low, we reserve the right not to hold the course. In this case, we may offer you alternative dates. We reserve the right to change dates at short notice due to the number of participants. Each participant will need their own notebook for programming and exercises. The software required for the training should be installed in advance; this software will be made available to the participants separately with instructions for installation. The conference fee is EUR 390 per person per day. This amount includes the costs for training documents, conference drinks and meals during the classroom training, as well as annual access to our English-language training courses. You will receive an invoice for the course fees. On receipt of the invoice, we request a bank transfer, payable immediately without deduction. Travel costs to and from the training location and hotel accommodation for classroom training courses are to be borne by the participant.
Page
Detail
Organizational information Level A training courses take place on three consecutive days, each from 09:00 to 17:00. From Level B, the training courses take place on two consecutive days, each from 09:00 to 17:00. The number of participants is limited to a maximum of 8 participants at Schneider Intercom Technical equipment - For a successful participation each participant needs Notebook (at least Windows 10 Professional (x64) from version 20H2) Administrator rights (ability to install software and full access to the network card settings) Browser: Google Chrome (current version) Current .NET framework WLAN Ethernet interface Software installed before the start of the course: Commend Installer package (CCT800, IP Station Config, ComLOG, VirtuoBro), Commend Set-UP, Wireshark Level C only additionally: ComPLC, current version Level D only additionally: Activation of Hyper-V. Instructions for preparing the notebook will be sent to participants before the start of the course. Registrations will be considered in the order in which they are received. Please provide the full names and e-mail addresses of the participants when booking. Participants will receive a confirmation of registration from Schneider Intercom with the exact address of the training location for classroom training or the access data for online training. Participants will also receive access data to our online cLibrary and to our English-language training program with additional training courses. Access to the training platform is limited to one year from confirmation of registration for the training course. If the number of registrations for a training course is too low, we reserve the right not to hold the course. In this case, we may offer you alternative dates. We reserve the right to change dates at short notice due to the number of participants. Each participant will need their own notebook for programming and exercises. The software required for the training should be installed in advance; this software will be made available to the participants separately with instructions for installation. The conference fee is EUR 390 per person per day. This amount includes the costs for training documents, conference drinks and meals during the classroom training, as well as annual access to our English-language training courses. You will receive an invoice for the course fees. On receipt of the invoice, we request a bank transfer, payable immediately without deduction. Travel costs to and from the training location and hotel accommodation for classroom training courses are to be borne by the participant.
Page
Modul A
Training Area MODULE A - INTRODUCTION & BASICS Overview of all training courses This product training course provides you with an overview of our Symphony intercom terminals, VirtuoSIS intercom servers, classic intercom stations and servers, serverless operation, and our Symphony Cloud. Note: The Module A course has been extended to three days to cover a more comprehensive range of topics. This allows us to ensure that participants gain an in-depth understanding of all relevant aspects and are better prepared for the challenges they face in their day-to-day work. Title Start date End date Location Free places Modul A1 - Einführung & Basics 18.02.2026 20.02.2026 Düsseldorf, Deutschland 5 Modul A2 - Einführung & Basics 09.03.2026 11.03.2026 Düsseldorf, Deutschland 6 Modul A3 - Einführung & Basics 14.04.2026 16.04.2026 Düsseldorf, Deutschland 8 Modul A4 - Einführung & Basics 18.05.2026 20.05.2026 Düsseldorf, Deutschland 8 Modul A5 - Einführung & Basics 23.06.2026 26.06.2026 Düsseldorf, Deutschland 8 Modul A6 - Einführung & Basics 06.07.2026 08.07.2026 Düsseldorf, Deutschland 8 Modul A7 - Einführung & Basics 11.08.2026 13.08.2026 Düsseldorf, Deutschland 8 Modul A8 - Einführung & Basics 29.09.2026 01.10.2026 Düsseldorf, Deutschland 8 Modul A9 - Einführung & Basics 12.10.2026 14.10.2026 Düsseldorf, Deutschland 8 Modul A10 - Einführung & Basics 10.11.2026 12.11.2026 Düsseldorf, Deutschland 8
Page
Modul D
Training Area MODULE D - SYMPHONY ADVANCED Overview of all training courses In Module D - Symphony Advanced, technicians who have already completed Module A or Module B training are trained in network technology and IT security, as well as VirtuoSIS and server redundancy. Note: *Module C – SymMX & ComPLC can be booked as an optional extension to selected D modules for an additional training day. Title Start date End date Location Free places Modul D1* - Symphony Advanced 28.04.2026 29.04.2026 Düsseldorf, Deutschland 7 Modul D2 - Symphony Advanced 08.12.2026 09.12.2026 Düsseldorf, Deutschland 8
Page
Modul G
Training Area MODULE G - FOLLOW UP Overview of all training courses The follow-up training is for experienced users and provides information on the latest features; participation every two years is mandatory in order to maintain “Certified Partner” status. Title Start date End date Location Free places Modul G1 - Follow Up 09.06.2026 09.06.2026 Online 96